ModMyMods MOD-0294 USB 3.1 Type E to USB 3.0 20-pin adapter cable 20cm
Adapts a USB 3.1 Type-E motherboard header to a USB 3.0 20-pin front-panel connector at 5 Gbps over 20 cm
- Product colorBlack
- Key featuresUSB 3.1 Type - E to USB 3.0 20-pin cable.
- Adapts USB 3.1 Type-E header to USB 3.0 20-pin front-panel connector
- Limited to 5 Gbps throughput by USB 3.0 specification
- Compact 20 cm length suits tight case routing
- Black finish matches standard internal cable aesthetics
- Enables front-panel USB 3.0 ports on newer motherboards
Front-panel USB adapter for legacy cases
This 20 cm cable connects a motherboard USB 3.1 Type-E header to a chassis front-panel USB 3.0 20-pin connector. It lets builders use modern boards with cases that only provide the older internal header. The link operates at 5 Gbps because the 20-pin side is limited to USB 3.0 signalling.
Black 20 cm internal cable with keyed headers
The cable is sheathed in black sleeving and carries standard keyed connectors on each end. At 20 cm it reaches typical front-panel header locations without excess slack. No additional mounting hardware or latch clips are included; the connectors rely on friction fit.
No software or extra accessories included
The package contains only the adapter cable itself. There are no drivers, configuration utilities or supplementary brackets. Functionality is purely passive, so the operating system sees a standard USB 3.0 connection once the cable is fitted.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $10.99
- Cheaper than about 70% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ModMyMods |
| Model name | MOD-0294 |
| Product color | Black |
Questions about this item
Does the USB 3.1 Type‑E header run at its full speed through this adapter?
The adapter limits the connection to 5 Gbps because the USB 3.0 20‑pin side cannot exceed that rate.
Will the 20 cm length reach from a bottom‑mounted motherboard header to a front‑panel USB 3.0 connector in a mid‑tower case?
At 20 cm the cable suits short internal routes; measure your specific board‑to‑panel distance before installing.
Which orientation does the keyed USB 3.0 20‑pin plug require when seating it on the header?
Align the missing‑pin key on the plug with the blocked hole on the header, then press straight down until the latch clicks.
More in Internal PSU & Riser Cables
Similar items
Nippon Labs POW-04412 12" Molex 5.25 Female to Female internal power cable
- 1 ft (0.3 m)
- Multi-Color
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





