Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts a DisplayPort 1.2a source to 4K HDMI at 30 Hz, Dual Link DVI at 2560x1600p @60 Hz, or VGA at 1920x1080p @60 Hz, one output at a time
This passive adapter lets a DisplayPort 1.2a source drive one HDMI, Dual Link DVI, or VGA monitor at a time. It targets users who need to connect older projectors or newer 4K screens without an active converter. Only one output operates at once, so multi-display modes such as Eyefinity or Surround are not supported. The white polycarbonate housing measures 6 feet end to end.
Because the adapter draws no external power, it adds no measurable thermal load or fan noise to the system. Power consumption stays within the DisplayPort source capability, so there is no need for an additional supply. The passive circuitry also keeps the signal path simple for reliable operation at the rated resolutions.
Panel screw holes on the VGA and DVI ports let you fasten the cable to the display, preventing accidental disconnects in tight racks or busy desks. The fixed 6-foot length and large multi-output head (50 by 90 mm) may limit routing in very small enclosures. No software or drivers are bundled; the adapter works purely through the host graphics configuration.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Monoprice |
| Model name | 112800 |
| Part number | 112800 |
Plug the DisplayPort end into the source and choose one of the three outputs — HDMI, DVI or VGA — for the display. The mistake is connecting more than one output at the same time; only a single output works.
No routine maintenance is required. Replace the adapter if the cable jacket frays, the 6 ft length develops kinks, or the panel screws on the VGA and DVI connectors strip and no longer hold.
The HDMI output caps at 3840x2160p @30Hz, so 4K content runs at half the refresh rate of the DVI and VGA outputs, which both reach 60Hz at their maximum resolutions.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?