Monoprice 145436 Cat6A Patch Cable 75 ft 26AWG 10G Black
Shielded Cat6A patch cable with 26AWG bare copper conductors, 500MHz bandwidth, gold-plated RJ45 connectors and a non-booted design for high-density installs
- Connector count2
- Product typeNetworking Patch Cables
- Key featuresShielded Twisted Pair (STP) Category 6A Ethernet cable
- Supports 10 Gbps networking with Category 6A shielding
- 26 AWG stranded bare copper conductors for flexible routing
- 500 MHz bandwidth enables high-speed data transmission
- Gold-plated RJ45 contacts resist corrosion and maintain signal quality
- Non-booted design saves space in high-density installations
75 ft Cat6A STP patch cable
Monoprice 145436 is a 75-foot shielded twisted-pair Category 6A patch cable built with 26AWG stranded bare copper conductors and gold-plated RJ45 contacts. The non-booted connectors reduce bulk in dense patch panels or server racks. It is rated for 500 MHz bandwidth and 10 Gbps transmission.
Suited for high-density 10G copper links
Network administrators wiring data-centre cabinets, office patch panels or home labs where space between ports is tight will benefit from the slim non-booted plugs. Builders who need outdoor-rated, direct-burial or plenum jackets should look at cables specifically listed for those environments.
500 MHz bandwidth enables 10G over 75 ft
The 500 MHz rating is the figure that confirms the cable can carry 10 Gbps Ethernet across the full 75-foot length. If your installation requires longer runs or a different fire rating, verify those specifications separately.
How it compares
Measured against everything we stock in Mini DP Monitor Cables, at today’s prices. Recalculated every night.
- Price $25.99
- Pricier than about 87% of the 243 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Monoprice |
| Model name | 145436 |
| Product type | Networking Patch Cables |
| Ports & slots | |
| Connector count | 2 |
Questions about this item
Does the 75 ft Cat6A cable use standard RJ45 plugs that fit a typical keystone jack?
Yes, it terminates in two standard RJ45 connectors with 50 µm gold-plated contacts designed for regular keystone jacks and network ports.
Is there a specific orientation for the non-booted RJ45 connectors when plugging them into a patch panel?
No orientation is required; the non-booted plugs insert either way, but press the tab fully until it clicks to seat the 26 AWG conductors properly.
Will the bare copper conductors or gold-plated contacts need periodic re-termination?
The solid bare copper conductors and 50 µm gold plating are rated for the cable's service life; re-termination is only needed if a connector is physically damaged.
More in Mini DP Monitor Cables
Similar items
Nippon Labs MINIDP-HDMI-10 mini displayport cable 10 ft 32 AWG
- 10 ft (3.05 m)
- Mini DisplayPort to…
Cables To Go 54301 Mini DisplayPort Cable 6 ft 4K 30Hz
- 6 ft (1.83 m)
- Male to Male
STARTECH MDP2DVIMM10B Mini DisplayPort to DVI cable 10 ft
- 10 ft (3.05 m)
- Connector A: 1 - Mi…
STARTECH MDP2DVIMM3BS mini displayport cable 3ft active 1920x1200
- 3 ft (0.91 m)
- 1 x Mini-DisplayPor…
STARTECH MDP2VGAMM3B mini displayport cable 3 ft 1920x1200
- 3 ft (0.91 m)
- 1 - Mini-DisplayPor…





