Moxa NPort 5210 w/Adapter 2 Port Serial Device Server
Connects two serial devices to Ethernet via 10/100Base-TX, supports RS-232/422/485 at up to 115200 bps, DIN-rail mountable with terminal-block connectors and 15KV ESD protection
- Connect serial devices to Ethernet via 10/100M Fast Ethernet
- Surge protection up to 15KV ESD for reliable operation
- Flexible power input supports 110V or 230V supplies
- Compact DIN-rail design fits 3.54"H x 1.4"W x 2.4"D spaces
- Two serial ports handle RS-232/422/485 at up to 115200 bps
Industrial Serial Connectivity
The Moxa NPort 5210 is a new industrial device server that connects two RS-232 serial devices to a 10/100Base-TX Ethernet network. It accepts 110V or 230V power and mounts on a DIN rail for cabinet installation.
Capacity and Headroom
Two serial ports handle data rates from 300 to 115200 bps with 7 or 8 data bits, while 15KV ESD protection guards the interfaces. The 100 Mbps Ethernet link sets the practical throughput ceiling for aggregated traffic.
Fast Ethernet Limits
The 10/100M RJ-45 port restricts network speed to 100 Mbps full-duplex, so bandwidth-heavy applications will saturate the link before the serial ports reach their maximum baud rate.
How it compares
Measured against everything we stock in Serial & USB Device Servers, at today’s prices. Recalculated every night.
- Price $340.99
- Typical for this category: the median of 168 items is $335.99.
New to this? Buying networking gear with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Will the NPort 5210 connect to my legacy RS-232 equipment running at 115200 bps?
Yes, the server supports RS-232/422/485 serial interfaces with data rates from 300 to 115200 bps and 7 or 8 data bits, so existing serial devices can link to the 10/100Base-TX Ethernet network.
How can I verify the NPort 5210 is operating correctly once installed?
After wiring the RJ-45 Ethernet and the terminal-block serial ports, check that the unit powers from 110V or 230V, then confirm network connectivity and serial data flow at the configured baud rate.
What ships with the NPort 5210 and what must I source separately?
The package includes the device server with its power adapter; you will need to provide an Ethernet cable for the RJ-45 port and wiring for the screw-terminal serial connections.
More in Serial & USB Device Servers
Similar items
Lantronix ED41000P0-01 EDS4100 4-Port Device Server PoE
- Device Server
- 2 x serial - RS-232…
DELL 469-4842 Xeon E5-2620 v2 2.10 GHz device server
- Processor Upgrade
Lantronix ED41000P2-01 EDS4100 4-port device server PoE
- Device Server
- Form Factor: Wall-m…
Lantronix UD1100NL2-01 device server 1 port 10/100 256KB 2MB
- Device Server
- Network (RJ-45): 1…
Lantronix SGX5150102US device server 5150 802.11 10/100 1xRS232 RJ45 USB US
- Gateway
- Accelerate to IoT C…





