Athena Power AP-P4ATX60FE 600W server power supply
- 600 W
- Single
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Delivers 270 W to 1U servers, NAS units and ITX builds with 20+4-pin ATX and 4-pin CPU connectors plus two peripheral leads
The myVolts FSP270 60LE is a 1U form-factor server power supply rated at 270W. It accepts AC input from 100 to 240V at 50 to 60Hz and delivers power through a 20+4 pin motherboard connector and a 4 pin CPU connector. Two additional peripheral interfaces and two IDE interfaces are included for drive connectivity. The unit ships new in a metal housing with cables approximately 15.7in long.
This supply fits 1U rack chassis, ITX cases, NAS enclosures, all-in-one units, cash registers and routers where a 270W budget is sufficient. Builders needing higher wattage for multi-GPU configurations or additional drive bays should look elsewhere. The fixed cable set and 1U depth also limit use in full-height towers that expect modular cabling or ATX dimensions.
The motherboard connector combines a 20 pin block with a detachable 4 pin section, while the CPU connector is a single 4 pin plug. Verify that the target board uses this exact pairing; boards requiring an 8 pin EPS connector or a 24 pin fixed block will not connect without an adapter.
Measured against everything we stock in Server & Hot-Plug PSUs, at today’s prices. Recalculated every night.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
The 20+4Pin motherboard connector and 4Pin CPU connector deliver stable power to the board and processor, while two additional interfaces and two IDE interfaces provide peripheral connectivity.
This 1U form-factor unit is built from premium metal and fits standard 1U server bays, making it suitable for all-in-one machines, cash registers, routers, NAS servers, ITX small cases and other compact equipment.
Connect the AC input rated at 100 to 240V, 5 to 3A, 50 to 60Hz, then attach the 20+4Pin motherboard, 4Pin CPU, two extra interfaces and two IDE cables; the step often missed is verifying every connector seats fully before powering on.
More in Server & Hot-Plug PSUs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?