National Instruments TRC-8542 CAN HS/FD Transceiver Cable
Isolated CAN HS/FD transceiver cable connects NI-9860, PXIe-8510, cDAQ-9134 or cDAQ-9135 controllers to a CAN bus with software-selectable termination
- Connects CAN bus to NI-9860, PXIe-8510, cDAQ-9134 or cDAQ-9135 controllers
- Isolated cable includes transceiver for CAN HS/FD bus support
- Software-selectable termination resistors adapt to bus requirements
- New condition ensures reliable performance from first use
- Manufacturer part number 783699-02 identifies exact replacement
Flexible CAN HS/FD Connection Cable
The National Instruments TRC-8542 cable links a CAN bus to the NI-9860, PXIe-8510, or the native NI-XNET port on a cDAQ-9134 or cDAQ-9135 controller. It provides the required transceiver for CAN HS/FD communication in a single isolated assembly.
Software-Selectable Termination
The cable includes built-in termination resistors that can be enabled or disabled through software, removing the need for external hardware jumpers. Isolation protects the host controller from bus faults and ground loops.
Direct Plug-In With Compatible NI Hardware
Installation is a simple plug into the supported NI module or controller port; no separate transceiver box is required. Mismatched connectors or unsupported NI hardware will prevent operation.
How it compares
Measured against everything we stock in SFP & SFP+ Transceiver Modules, at today’s prices. Recalculated every night.
- Price $564.99
- Pricier than about 85% of the 1,470 comparable items (median $138.49).
New to this? Buying networking gear with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Should I pick the 783699-02 cable for my NI-9860 or PXIe-8510 module?
Yes, the TRC-8542 cable with part number 783699-02 is designed to connect CAN HS/FD buses to the NI-9860, PXIe-8510, cDAQ-9134 or cDAQ-9135 controllers.
What does the isolated transceiver cable do once installed in a real system?
It provides the physical CAN HS/FD transceiver and software-selectable termination resistors, electrically isolating the bus from the NI-XNET port on your controller.
Which interface standard does the cable use and what does it limit in practice?
The cable plugs into the native NI-XNET port on compatible cDAQ controllers or modules, capping the connection to the CAN HS/FD protocol supported by that port.
More in SFP & SFP+ Transceiver Modules
Similar items
STARTECH QSFP40GSR4ST 40GBASE-SR4 SFP transceiver
- Transceiver
- IEEE 802.3ba 40GBAS…
HPE JD089B Gigabit Ethernet SFP Transceiver 1000Base-T RJ-45
- Transceiver
- HCRP, SPP
AddOn GLC-T-AO-10PK 10-pack 1000Base-TX SFP transceiver
- RJ-45
- 1 x RJ45
AddOn J4858C-AO SFP transceiver 1000Base-SX 850nm 550m LC
- Transceiver
- TCP/IP
AddOn GLC-SX-MMD-AO-10PK SFP transceiver 1000Base-SX 850nm 550m LC DOM 10-pack
- 1 × 1000Base-SX 1 x…
- SFP (mini-GBIC)





