Battery Technology Inc. ET-LAD60W-BTI projector lamp 330 Watt 2000 Hrs
- 330 W
- 2,000 Hrs.
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 200 W replacement lamp module with housing delivers 2,000 to 3,000 hours of life for NEC projectors
The NEC VT495 lamp module (model VT85LP) is a 200W replacement projector lamp supplied as a fully assembled bulb and housing. It is designed for users who need a direct, ready-to-fit spare for compatible NEC projectors. The lamp uses a Ushio NSH 200W bulb and is built to ISO9001 quality standards.
The single specification that decides fit is the 200W rating; the lamp must match the projector's original wattage to operate correctly and achieve the rated 2,000 hours in normal mode or 3,000 hours in economy mode. Using a different wattage will cause ignition or brightness failures.
Installation consists of removing the old lamp housing and inserting the new module until it seats firmly; no separate bulb handling or alignment is required. The most common issue is forgetting to reset the projector's lamp-hour counter after replacement, which leaves the replacement warning active.
Measured against everything we stock in Replacement Projector Bulbs, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEC |
| Product type | Projector Lamp |
| Display | |
| Lamp lifespan | 2,000 (Normal) - 3,000 (Economy) Hrs. |
| Power | |
| Power rating | 200 W |
The 200W NSH bulb delivers the original brightness specified for the VT495 projector; actual lumen output depends on the projector's optical engine and selected mode.
The lamp module is built to the NEC VT495 specification and plugs directly into the projector's proprietary lamp socket without adapters.
Yes, the bulb comes pre-installed in a housing matched to the VT495 chassis, so it slides into the lamp compartment and secures with the existing screws.
More in Replacement Projector Bulbs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?