Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 1.5 TB registered DDR4 kit with six 256 GB ECC modules running at 2933 MHz and 1.2 V
This NEMIX RAM kit provides 1.5TB of DDR4 server memory across six 256GB registered DIMMs. It is built for enterprise platforms that require ECC error correction and registered signal buffering at the DDR4 2933 standard. The modules operate at 1.2V with a CAS latency of 21. This product is not for desktop PCs or consumer motherboards lacking registered DIMM support.
Each module runs at the standard 1.2V DDR4 voltage, keeping power draw consistent with the DDR4 2933 specification. Registered buffering and ECC logic add minimal overhead during typical server workloads. Passive cooling via system airflow is sufficient for normal operation. No active cooling components are included or required by the kit design.
Under continuous heavy memory utilisation the 8Rx4 organisation maintains signal integrity through the registered interface. ECC corrects single-bit errors and detects multi-bit errors without halting the system. The DDR4 2933 speed rating is sustained across all six modules in supported server platforms. Stability depends on motherboard qualification and proper population rules.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Model name | Part#: MR23400-2584K6-SM-SYS-5019P-M |
| Part number | Part#: MR23400-2584K6-SM-SYS-5019P-M |
| Total capacity | 1.5 TB (6 × 256 GB) |
| Performance | |
| Rated speed | DDR4 2933 (PC4 23400) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | 21 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 8Rx4 |
| Power | |
| Rated voltage | 1.2 V |
Power down the server, open the chassis, align each 288-pin module with the DDR4 slot key, press firmly until the ejector tabs click, then confirm all six are recognised in BIOS before closing the case.
The modules have no moving parts; dust the slots annually with compressed air, and replace any stick that begins reporting correctable ECC errors in the system event log.
The 1.2V DDR4 modules will hit thermal throttling or the platform's maximum registered DIMM capacity before the 21-cycle CAS latency becomes a bottleneck.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?