Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
128 GB DDR5 registered ECC RDIMM running at 4800 MHz with CL40 latency and 1.1 V for Dell PowerEdge R7625 servers
This NEMIX RAM module provides 128GB of DDR5 memory rated at 4800 MT/s with a CL40 latency and 1.1V operation. It uses a 288-pin RDIMM form factor with a 4Rx4 rank configuration and on-board ECC. The registered buffer helps maintain signal integrity across the memory bus. It is built with major OEM DRAM chips from Samsung, Micron or Hynix.
This module targets administrators expanding memory in a Dell PowerEdge R7625 rack server where the qualified part number MR38400-744K1 is required. The registered ECC design matches the platform's requirements for error correction and command buffering. Builders using consumer motherboards, laptops or non-registered DIMM slots cannot use this memory. Systems limited to lower densities or different rank structures should look elsewhere.
The single most decisive specification is the 128GB capacity organised as a single 4Rx4 rank. The memory controller and BIOS must explicitly support this density and rank geometry for the module to initialise. Verify the server's qualified vendor list and maximum supported rank per channel before purchase. If the platform only accepts 1Rx4, 2Rx4 or lower capacities, this DIMM will not function.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Product line | Dell Series Server Memory |
| Model name | Dell Compatible DDR5 ECC Registered RDIMM |
| Part number | MR38400-744K1 |
| Total capacity | 128 GB |
| Product type | 288-Pin DDR5 RDIMM |
| Performance | |
| Rated speed | DDR5 4800 (PC5 38400) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | CL40 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 4Rx4 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.1 V |
Yes, when installed in the same Dell PowerEdge R7625 the module operates at DDR5 4800 (PC5-38400) with CL40 latency and 1.10 V, matching the platform's native memory speed.
Check the system BIOS or iDRAC interface — it will show 128 GB per DIMM, report ECC as active, and log any corrected errors in the system event log.
The module has no heat spreader and requires no cables; it is a bare 288-pin DDR5 RDIMM ready for direct insertion into the server memory slots.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?