Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
256 GB DDR5 ECC registered server memory kit with two 128 GB modules at 4800 MT/s, CL40, 1.1 V for Dell Precision 5860 workstations
This kit provides 256GB of DDR5 memory in two 128GB registered DIMMs. It is built for Dell Precision 5860 tower workstations that require ECC protection. The modules operate at 4800 MT/s with a CAS latency of 40. They run at 1.1V and use a 288-pin form factor.
Registered buffering and ECC correction maintain data integrity during continuous workloads. The 4Rx4 organisation allows high density without increasing electrical load on the memory controller. Operation at 1.1V limits heat output during extended compute tasks. No heat spreader is fitted, so chassis airflow must handle cooling.
The PC5-38400 rating defines the peak transfer rate of the DDR5 interface. Maximum capacity per DIMM is 128GB with this rank configuration. Registered DIMMs require a motherboard that supports buffered memory. Mixing with unbuffered or non-ECC modules is not supported.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Product line | Dell Series Server Memory |
| Model name | Dell Compatible DDR5 ECC Registered RDIMM |
| Part number | MR38400-744K2 |
| Total capacity | 256 GB (2 × 128 GB) |
| Product type | 288-Pin DDR5 RDIMM |
| Performance | |
| Rated speed | DDR5 4800 (PC5 38400) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | CL40 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 4Rx4 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.1 V |
Each module operates at 1.10V, the standard DDR5 voltage for registered ECC memory. Total system draw depends on the Dell Precision 5860 memory controller and how many slots are populated.
The kit is listed as compatible with the Dell Precision 5860 Tower Workstation. Dell validates memory configurations per BIOS release, so check the workstation's support page for the latest firmware before installing.
Mixing ranks and capacities is possible on DDR5 platforms, but the memory controller will run all modules at the lowest common speed and timing. For best stability, populate identical 4Rx4 modules per channel.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?