Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Two 128 GB DDR5 ECC registered DIMMs totalling 256 GB at 4800 MT/s CL40 1.1 V for Dell PowerEdge R660 servers
This kit provides 256GB of DDR5 server memory in two 128GB registered modules. It is built for the Dell PowerEdge R660 and other platforms that accept 288-pin ECC RDIMMs. IT teams use it to expand capacity for virtualisation, databases and memory-intensive workloads.
Each module runs at 4800 MT/s (PC5-38400) with a CAS latency of 40 at 1.10V. The 4Rx4 organisation delivers high density per slot, so two modules fill two DIMM positions with 256GB total. Workloads that exceed this capacity will need additional slots or higher-density modules.
The DDR5 ECC registered interface adds on-die error correction and a register to reduce electrical load on the memory bus. This improves signal integrity at speed but requires a motherboard chipset that supports registered DDR5. Systems limited to unbuffered memory or earlier DDR generations cannot use these modules.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Product line | Dell Series Server Memory |
| Model name | Dell Compatible DDR5 ECC Registered RDIMM |
| Part number | MR38400-744K2 |
| Total capacity | 256 GB (2 × 128 GB) |
| Product type | 288-Pin DDR5 RDIMM |
| Performance | |
| Rated speed | DDR5 4800 (PC5 38400) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | CL40 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 4Rx4 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.1 V |
The kit provides 256 GB as a matched 2 x 128 GB pair at DDR5 4800 CL40 1.10 V 4Rx4 registered ECC; for best stability populate remaining slots with identical spec modules.
Enter the system BIOS or iDRAC and confirm memory speed shows 4800 MT/s, voltage 1.10 V, and ECC status enabled; then run a full memory diagnostic from the server firmware.
The package contains the two 288-pin DDR5 128 GB RDIMMs only; no heat spreaders, cables or additional hardware are included.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?