Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 32 GB DDR4-2933 registered ECC module with 2Rx8 organisation, CL21 latency and 1.2 V operation for server memory upgrades
This 32GB registered DIMM delivers DDR4 2933MHz performance with ECC error correction for server workloads. The single-module kit suits administrators upgrading compatible platforms that require registered memory. It operates at the standard 1.2V DDR4 voltage and carries a CAS latency of 21. Buyers needing non-ECC or unbuffered modules for desktop boards cannot use this product.
The module uses a 288-pin RDIMM form factor and a 2Rx8 rank organisation built from Samsung, Micron or Hynix components. Registered buffering reduces electrical load on the memory controller, allowing larger capacities per channel in multi-socket servers. The 1.2V rating matches mainstream DDR4 server power envelopes. Systems that accept only unbuffered UDIMMs or SO-DIMMs will not recognise this module.
The PC4-23400 rating defines the peak transfer rate for this DDR4 generation. Registered ECC modules at this speed are designed for platforms qualified to the DDR4 2933MHz standard; faster or slower memory controllers will downclock or fail to train. ECC functionality requires chipset and BIOS support that is absent on consumer desktop chipsets. Capacity expansion beyond a single 32GB module depends on the number of DIMM slots and the memory controller's maximum rank count per channel.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Model name | Part#: MR23400-328K1-SM-SYS-5019P-M |
| Part number | Part#: MR23400-328K1-SM-SYS-5019P-M |
| Performance | |
| Rated speed | DDR4 2933 (PC4 23400) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | 21 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx8 |
| Power | |
| Rated voltage | 1.2 V |
The module runs at 2933 MT/s with a PC4-23400 bandwidth ceiling; the memory controller and platform firmware decide the final operating speed.
It requires a 288-pin DDR4 DIMM socket and enough vertical clearance for a standard registered DIMM height; the 2Rx8 layout does not change the slot keying.
Power down, open the chassis, align the notch with the key, press firmly until both latches click, then verify in BIOS that ECC and registered mode are enabled.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?