Crucial CT32G56C46S5 32GB DDR5 5600 CL46 262-pin SO-DIMM laptop RAM
- 32 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
4 GB DDR3 1600 SODIMM laptop memory module with 204 pins and 1.35 V operation
This NEMIX RAM module provides 4GB of DDR3 memory at 1600MHz with a 204-pin SO-DIMM form factor. It operates at 1.35V with CL11 latency and uses a 2Rx8 Non-ECC unbuffered design. The part number MS12800-428K1 identifies this specific configuration for compatible systems.
This memory fits laptops, all-in-one PCs and small-form-factor devices that accept DDR3 204-pin SO-DIMMs. It also matches the QNAP RAM-4GDR3LA0-SO-1600 specification for NAS upgrades. Builders needing DDR4 260-pin modules, ECC error correction, registered buffers, or capacities above 4GB cannot use this part.
The 204-pin DDR3 SO-DIMM interface is the single specification that decides fitment. Systems with DDR4 260-pin slots physically reject this module. Verify the motherboard or NAS manual lists DDR3 1600MHz PC3-12800 1.35V Non-ECC support before purchasing.
Measured against everything we stock in Laptop RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Product line | NEMIX RAM DDR4 Orignial Series 260-Pin NON-ECC Unbuffered SODIMM Memory |
| Model name | DDR4 NON-ECC Unbuffered SODIMM Laptop, AIO, SFF, NAS Storage Device Memory |
| Part number | MS12800-428K1 |
| Total capacity | 4 GB |
| Product type | 260-Pin DDR4 SO-DIMM |
| Performance | |
| Rated speed | DDR3 1600 (PC3 12800) |
| Memory | |
| CAS latency | CL11 |
| ECC support | No |
| Buffer type | Unbuffered |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.35 V |
This listing is for a single 4 GB module; choose it if your laptop or NAS has one free SODIMM slot and the manufacturer specifies 4 GB as the maximum per slot.
The module runs at DDR3 1600 (PC3-12800) with CL11 latency at 1.35 V, so the memory controller will operate at that speed if the platform supports DDR3 1600; otherwise it will downclock to the highest supported DDR3 rate.
The product title and description specify a 204-pin DDR3 SODIMM, which fits DDR3 laptop and NAS slots; it will not fit 260-pin DDR4 sockets.
More in Laptop RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?