Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
64GB DDR5 4800 CL40 ECC registered RDIMM kit with four 16GB modules for Dell Precision 5860 workstations
This 64GB kit contains four 16GB DDR5 registered DIMMs rated at 4800 MT/s with CL40 latency. It is built for the Dell Precision 5860 tower workstation and other DDR5 ECC registered platforms that require 1Rx8 organisation. The modules operate at 1.1V and use 288-pin connectors.
Each module is registered to reduce electrical load on the memory controller and uses Samsung, Micron or Hynix components selected by the manufacturer. The absence of a heat spreader keeps the profile low for dense server or workstation chassis. ECC circuitry corrects single-bit errors to protect data integrity in critical workloads.
The kit runs at the standard DDR5 4800 (PC5-38400) data rate; higher speeds are not supported by this module specification. Registered DIMMs cannot be used in consumer boards that accept only unbuffered memory. Capacity is fixed at 64GB across the four slots provided by the kit.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Product line | Dell Series Server Memory |
| Model name | Dell Compatible DDR5 ECC Registered RDIMM |
| Part number | MR38400-618K4 |
| Total capacity | 64 GB (4 × 16 GB) |
| Product type | 288-Pin DDR5 RDIMM |
| Performance | |
| Rated speed | DDR5 4800 (PC5 38400) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | CL40 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 1Rx8 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.1 V |
The kit runs at DDR5 4800 (PC5 38400) with CL40 latency at 1.10 V.
It fits a standard 288-pin DDR5 RDIMM slot; no heat spreader means low-profile clearance is sufficient.
Populate the four slots per the workstation manual, then verify ECC and registered mode are enabled in BIOS.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?