Nippon Labs POW-S6800-6IN 6.1" Molex to 2 x SATA 15-pin internal power cable
A 6.1 in adaptor that splits one Molex LP4 male connector into two SATA 15-pin female connectors for powering SATA drives from a legacy power supply
- Cable length6.1 in (15.5 cm)
- First connector1x Molex LP4 male
- Second connector2x SATA 15pin female
- Connector count3
- Connector details5.25 in Male to Two SATA 15-pin Female
- Connector genderFemale to Male
- Powers two SATA drives from one Molex connector
- 1 in length fits tight drive bays
- Converts legacy PSU output to modern SATA power
- 25 in Molex male plugs into existing supply
- Dual 15-pin SATA females support HDDs and optical drives
What this cable does
The Nippon Labs POW-S6800-6IN converts a single Molex LP4 male connector into two 15-pin SATA power connectors. It lets you run SATA hard drives, optical drives or tape backups from a power supply that lacks native SATA outputs. The Y-splitter is 6.1 inches long and carries three connectors in total.
Installing the splitter
Plug the Molex end into an available LP4 lead from your PSU, then attach the two SATA plugs to your drives. The short length keeps cable routing tidy but limits reach between widely spaced bays. Ensure each connector seats fully; a loose Molex pin or misaligned SATA socket will cause intermittent power.
Check before ordering
Verify your power supply has a spare Molex LP4 lead and that your drives use standard 15-pin SATA power inputs. This adapter will not work with drives that require a different power interface or with proprietary PSU cables. It is not suited for builders who need more than two SATA connections from one Molex source.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $4.99
- Cheaper than about 95% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Nippon Labs |
| Model name | POW-S6800-6IN |
| Product color | Multi-Color |
| Ports & slots | |
| First connector | 1x Molex LP4 male |
| Second connector | 2x SATA 15pin female |
| Connector count | 3 |
| Connector details | 5.25 in Male to Two SATA 15-pin Female |
| Connector gender | Female to Male |
| Size & build | |
| Overall length | 6 in (15.2 cm) |
| Cable length | 6.1 in (15.5 cm) |
| Shipping weight | 0.02 kg |
| Package size | 191 × 43 × 22 mm |
Questions about this item
How can I confirm the cable is delivering power correctly after connecting it?
After connecting the Molex LP4 male end to the PSU and the two 15-pin SATA female ends to your drives, power on the system and verify each drive spins up and appears in BIOS or the operating system.
What connectors are included and is anything else required to use this adaptor?
The cable provides one Molex LP4 male connector and two 15-pin SATA female connectors. No extra parts are needed; plug it directly between your PSU and SATA devices.
Which version of this adaptor should I choose for my setup?
This single model POW-S6800-6IN is a 6.1 in Y-splitter converting one Molex LP4 male to two 15-pin SATA female connectors. Choose it when you need to power two SATA drives from one Molex output.
More in Internal PSU & Riser Cables
Similar items
Micro Connectors ATX 12V 4-Pin CPU Power Extension Cable 8 Inches
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Qinghai Electronics 20-Piece Cable Comb Set — 16×8-pin, 4×24-pin, Silver
- Silver
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…
Dimastech BT111 Black & Red Switch Cables 600mm 2-Pin I/O
- 1.97 ft (0.6 m)





