Nippon Labs VGA-ADT-1M2F 8" SVGA Y adaptor 1 male to 2 female vga cable
Splits one VGA signal to two displays using an 8-inch Y adaptor with double-shielded construction
- Connector count3
- Connector genderMale to Female
- Product typeVGA
- Overall length8 in (20.3 cm)
- Details8 in SVGA 1 Male to 2 Female Y Adaptor-HD15 Male to 2 x HD15
- Splits one VGA source to two displays
- 8-inch Y adaptor with HD15 male and dual HD15 female connectors
- Double-shielded construction blocks EMI and RFI interference
- Moulded hex nuts secure each connection firmly
- Three-connector design enables simple dual-monitor setup
Nippon Labs VGA Y adaptor for dual displays
The Nippon Labs VGA-ADT-1M2F splits a single VGA output into two female HD15 ports so two monitors or projectors can show the same image. It suits offices, classrooms or signage setups that need mirrored screens without adding a second graphics card. The 8-inch length keeps the connection tidy at the back of a PC or laptop. Hex nuts on every connector lock the cables in place during moves.
Molded double-shielded build with hex nuts
A moulded housing and double-shielded wiring suppress EMI and RFI interference that can blur text or cause flicker on long cable runs. Each HD15 end carries captive hex nuts so installers can finger-tighten the connection without tools. The short Y tail reduces strain on the source port and prevents the adaptor from blocking adjacent sockets on crowded I/O panels.
Replaces makeshift splitter chains or KVMs
This adaptor removes the need to daisy-chain separate VGA splitters or use a bulky KVM when only signal duplication is required. The jump is worth it when you want a single compact device that guarantees a clean mirrored signal to two displays. It does not serve buyers who need independent content on each screen or who must convert the signal to HDMI, DisplayPort or DVI.
How it compares
Measured against everything we stock in VGA Monitor Cables, at today’s prices. Recalculated every night.
- Price $7.99
- Cheaper than about 70% of the 1,119 comparable items (median $10.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Nippon Labs |
| Model name | VGA-ADT-1M2F |
| Product type | VGA |
| Ports & slots | |
| Connector count | 3 |
| Connector gender | Male to Female |
| Size & build | |
| Overall length | 8 in (20.3 cm) |
| Shipping weight | 0.08 kg |
| Package size | 179 × 145 × 30 mm |
Questions about this item
What resolution does the HD15 VGA interface on this adaptor support in practice?
The HD15 VGA interface carries analogue RGBHV signals and will pass any resolution the source and displays negotiate, limited by cable quality and length rather than the adaptor itself.
What physical space and mounting hardware does the VGA-ADT-1M2F need to fit?
It requires room for an 8-inch Y-split cable with three HD15 connectors; each female port has hex nuts for screw-in retention to secure the mated cables.
How do I install the Y adaptor and which step is often missed?
Plug the single HD15 male end into the source, attach both display cables to the two HD15 female ends, then tighten every hex nut — skipping the screw-down step is the common mistake.
More in VGA Monitor Cables
Similar items
HANNORD DisplayPort to VGA Cable 6 ft Male to Male Black
- DisplayPort to VGA…
- Black
4XEM 4X35MF15 svga cable 15 ft 3.5 mm male to female
- Cable
- Black
Tripp Lite P510-006 6 ft VGA cable HD15 male to female
- no type specified
- Black





