Total Micro Technologies W2F74AA-TM 150W power adapter
- Others
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Supplies 12 V at 1 A through a 5.5 × 2.1 mm barrel plug on a 1.5 m cable, UL-listed with Level VI efficiency
This 12 V 1 A power adapter supplies up to 12 W to devices that use a 2.1 mm × 5.5 mm centre-positive barrel jack. It accepts AC 100–240 V at 50/60 Hz and meets Level VI energy-efficiency requirements. The 1.5 m cable and UL 62368-1 certification make it suitable for indoor use with LED strips, cameras, Bluetooth speakers and routers. Class 2 transformer construction provides short-circuit, over-voltage and over-current protection.
The adapter suits equipment that draws 1 A or less at 12 V DC, such as LED lighting, security cameras, small audio gear and network routers. It is not for hardware that needs more than 12 W, higher voltage, a different barrel size or a locking connector. Outdoor or high-temperature installations are also outside its rated use. Buyers who need adjustable voltage, USB-C output or medical-grade approval should look elsewhere.
At the full 1 A rating the unit delivers 12 W continuously with low heat and silent operation. The 24 AWG cord and Level VI design keep losses small across the 100–240 V input range. Headroom ends when the load exceeds 1 A or when the connected device requires a voltage other than 12 V DC. The 1.5 m cable length sets the practical placement limit from the mains outlet.
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product line | LD001Z |
| Model name | LD001Z |
| Part number | LD001Z |
| Product type | 9 V |
| Adapter type | USB C Charger |
| Product color | Black |
| Ports & slots | |
| First connector | 2.1 × 5.5 mm |
| Second connector | 2.1 × 5.5 mm |
| Connector type | Male |
| Size & build | |
| Cable length | 5 in (12.7 cm) |
| Cable jacket | Plastic |
| Product dimensions | 14.33 in W × 12.83 in H × 9.06 in D |
| In the box | |
| Units per package | 1 |
| In the box | 1 |
The adapter accepts AC 100-240 V at 50/60 Hz, so it works on standard household mains worldwide without a separate voltage selector.
Yes, the cord terminates in a 5.5×2.1 mm centre-positive barrel connector that matches the common polarity used by most 12 V LED strips, cameras and routers.
Measure the barrel plug with a multimeter set to DC volts; a reading close to 12 V while the device is powered confirms the adapter is regulating correctly.
More in AC Adapters & Power Bricks
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?