No Sew PS/2 to USB Adapter 5365PQEW5650 Black
Connects PS/2 keyboard and mouse to a single USB port, plug-and-play with no drivers needed
- Connector typeUSB
- Seller noticeConnecting PS/2 devices to USB ports, No Compatible Phone Mo
- Product typeConnecting PS/2 devices to USB ports
- DetailsUSB, 9, Connecting PS/2 devices to USB ports, 5365PQEW5650
- Key featuresConnecting PS/2 devices to USB ports, USB
- In the box1, Bruislard, 5365PQEW5650
- Connect PS/2 keyboard and mouse to USB ports
- Plug-and-play setup requires no driver installation
- Dual PS/2 ports from one USB connector
- ABS housing weighs 32 g for durability
- Compact 20 x 14 x 1.1 cm form factor
PS/2 to USB Adapter for Legacy Peripherals
This adapter connects PS/2 keyboards and mice to a single USB port on modern computers. It is built for users who keep older input devices and need them to work with current hardware. No drivers or software are required for installation. The compact design suits desktop and mobile setups alike.
Passive Operation With No External Power
The unit draws negligible power from the USB bus and produces no audible noise during use. Its ABS housing stays cool because there are no active components inside. The lightweight construction at 32g adds no strain to the port. Operation remains stable across supported operating systems.
Splits One USB Port Into Two PS/2 Ports
A single USB-A connector branches to dual PS/2 sockets for simultaneous keyboard and mouse connection. The cable length and connector spacing are fixed by the moulded design. Buyers who need to connect more than two PS/2 devices or who require a PS/2-to-PS/2 gender changer will need a different solution.
How it compares
Measured against everything we stock in PS/2 to USB Adapters, at today’s prices. Recalculated every night.
- Price $6.99
- Cheaper than about 99% of the 115 comparable items (median $26.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Bruislard |
| Product line | 5365PQEW5650 |
| Model name | 5365PQEW5650 |
| Part number | 5365KBAN2890 |
| Product type | Connecting PS/2 devices to USB ports |
| Ports & slots | |
| Connector type | USB |
| In the box | |
| In the box | 1, Bruislard, 5365PQEW5650 |
Questions about this item
How do I install the PS/2 to USB adapter and what step do people often miss?
Plug the USB connector into the computer, then attach the PS/2 keyboard and mouse to the two ports. The step often missed is seating both PS/2 plugs fully before powering on.
What maintenance or replacement will the adapter need later?
No routine maintenance is required. If the ABS housing cracks or the USB plug pins bend after repeated insertion cycles, replace the whole unit.
What limit appears first under sustained use with both keyboard and mouse connected?
The single USB port supplies limited current. High-draw PS/2 keyboards with backlighting may cause intermittent disconnects before the adapter itself overheats.
More in PS/2 to USB Adapters
Similar items
STARTECH GC46FMKEY USB to PS/2 Keyboard Adapter
- USB to PS/2
- Connector Types 1 -…
Thermaltake Argent K6 RGB Low Profile Mechanical Gaming Keyboard Cherry MX Speed Silver 454 x 157 x 37.5 mm
No Sew PS/2 to USB Adapter 2-Pack Green/Purple
- Male
- Connecting a keyboa…





