NShi CPU & GPU Cooling Fan for Lenovo Yoga C930, C930-13IKB, Yoga 7 Pro
A replacement CPU and GPU cooling fan compatible with Lenovo Yoga C930 and Yoga 7 Pro models, operating at 5V via a 4-pin connector
- Accessory categoryFan
- Keeps processor and graphics cool with dedicated 5 V fan
- Direct-fit replacement for Lenovo Yoga C930, C930-13IKB and Yoga 7 Pro
- Secure four-pin power connection ensures reliable operation
- Simple drop-in installation restores original thermal performance
- Brand-new unit backed by six-month manufacturer warranty
Compatible Laptop Models
This replacement cooling fan fits Lenovo Yoga C930, C930-13IKB and Yoga 7 Pro laptops. It restores active thermal management for the processor and graphics chip. Owners of these specific models can return system temperatures to factory specifications.
Build And Connection
The unit is a direct-fit CPU fan with a black housing and a four-pin power connector. It operates at the five-volt level used by the original cooling assembly. The plug-and-play interface matches the motherboard header without adapters or soldering.
When To Replace The Original
Install this fan when the stock cooler becomes noisy, spins irregularly or fails to keep temperatures in check. It addresses wear on the original bearing and airflow degradation over time. Buyers needing a second fan for a different laptop model will not find a match here.
How it compares
Measured against everything we stock in Laptop Cooling Stands & Fans, at today’s prices. Recalculated every night.
- Price $54.99
- Pricier than about 90% of the 6,169 comparable items (median $20.99).
Specifications
| Product | |
|---|---|
| Accessory category | Fan |
Questions about this item
Does the 4-pin power connection deliver the 5 V the fan requires?
Yes, the 4-pin connector supplies 5 V to the CPU and GPU cooling fan.
Will this fan fit inside a Lenovo Yoga C930-13IKB chassis?
It is built for the Yoga C930, C930-13IKB and Yoga 7 Pro models.
How is the fan installed, and which step is often missed?
Remove the bottom case, disconnect the old 4-pin fan, fit the new unit, reconnect the 4-pin cable, then reassemble.
More in Laptop Cooling Stands & Fans
Similar items
Archelon K1-2RG 140 mm 2200 RPM RGB laptop cooling pad
- 7 in (17.8 cm)
- 7.493 cm × 32.893 c…
DELL MGK85 laptop lid cover 17" blue for Inspiron 17R N7110
- Skin / Cover
- SWITCH by Design St…
ENHANCE 360° Rotating Laptop Cooling Pad Blue-Gray 140 mm 3 Fan 10-17 in
- 140 mm Fan
- Support up to 17-in…
EVESKY 240mm 12-Tube Aluminium Water-Cooling Radiator with Fan
- Cooler





