minisforum MS-A2 barebone mini PC Ryzen 9 9955HX 96GB 2TB
- Ryzen 9 9955HX
- FL1
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Three USB-C decoy trigger boards select 5 V, 9 V, 12 V, 15 V or 20 V via dip switches for PD 2.0, PD 3.0, QC and AFC chargers
This three-piece set of NuoTo decoy trigger boards negotiates fixed voltages of 5V, 9V, 12V, 15V, and 20V from USB-C power sources. It supports PD2.0, PD3.0, QC2.0, QC3.0, and AFC protocols for broad compatibility. DIP switches on the module select the desired output level. The pack suits makers and repairers needing configurable DC power.
Engineers validating USB-C chargers or powering 5V to 20V DC projects will find these triggers convenient. They are not suited for applications requiring programmable voltage steps, PPS negotiation, or automatic voltage detection. Buyers needing monitored output without a multimeter should look at alternative solutions. The lack of onboard indication demands external verification.
The decisive specification is the manual DIP-switch configuration that sets a single fixed output of 5V, 9V, 12V, 15V, or 20V. No dynamic adjustment or protocol-based negotiation occurs after power-up. Users must consult the printed table and confirm the resulting voltage with a multimeter before connecting sensitive circuitry. Incorrect switch positions yield an unpredictable voltage from the supported range.
Measured against everything we stock in Mini PC Barebone Systems, at today’s prices. Recalculated every night.
New to this? Buying a mini PC with crypto — what to check, what it costs to pay, and what is never asked for.
| Processor | |
|---|---|
| Processor | Other |
A USB-C charger or power bank that supports PD2.0, PD3.0, QC2.0, QC3.0, or AFC protocols is required to negotiate the output voltage.
No, these modules require a USB-C source capable of PD or QC negotiation; a standard 5V USB-A charger cannot trigger the higher voltage outputs.
Measure the output terminals with a multimeter before connecting your device, as there is no onboard voltage indicator.
More in Mini PC Barebone Systems
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?