NVIDIA MMA4Z00-NS 2x400Gb OSFP 850nm 50m SFP transceiver
Dual 400 Gb/s OSFP transceiver with two MPO-12 connectors for 850 nm multi-mode fibre links up to 50 m
- Dual 400 Gb/s links deliver 800 Gbit/s aggregate throughput
- Two MPO-12 ports simplify high-density switch-side cabling
- 850 nm multi-mode optics support 50 m reach in data centres
- 400GBase-SR8 compliance ensures interoperable 400 GbE operation
- 04 ft maximum distance covers typical rack-to-rack runs
Dual 400 Gb/s OSFP Transceiver
The NVIDIA MMA4Z00-NS is a switch-side OSFP module that carries two 400 Gb/s lanes for a total of 800 Gbit/s throughput. It targets data-centre operators building InfiniBand NDR or 400GBase-SR8 optical networks. The unit uses 850 nm multi-mode fibre with MPO-12 connectors and is rated for 50 m or 164.04 ft link distance. Buyers who need single-port 400 Gb/s modules, longer-reach single-mode optics, or QSFP-DD form factors cannot use this part.
Sustained 800 Gbit/s Throughput
Each of the two ports runs at 400 Gb/s continuously under the 400GBase-SR8 specification, giving an aggregate 800 Gbit/s without burst-only ratings. The 850 nm multi-mode interface maintains signal integrity across the full 50 m reach when paired with OM3 or OM4 fibre. Thermal design matches standard OSFP switch cages, so sustained line-rate traffic does not trigger throttling in correctly ventilated chassis. Installations that exceed the 50 m limit or use incompatible fibre grades will see errors rather than graceful degradation.
Hot-Plug OSFP With MPO-12
The transceiver slides into any compliant OSFP cage and locks with the standard bail latch; no tools are required. Dual MPO-12 receptacles accept keyed multi-mode trunk cables, and the keying prevents cross-polarity mating mistakes. Common issues include inserting the module into a QSFP-DD cage, using single-mode MPO cables, or exceeding the 50 m distance, all of which prevent link-up. Clean the MPO end-faces before each insertion to avoid contamination-related loss.
How it compares
Measured against everything we stock in SFP & SFP+ Transceiver Modules, at today’s prices. Recalculated every night.
- Price $2,017.99
- Pricier than about 90% of the 1,470 comparable items (median $138.49).
New to this? Buying networking gear with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Size & build | |
|---|---|
| Shipping weight | 0.27 kg |
| Package size | 229 × 152 × 102 mm |
Questions about this item
How much heat and power should I expect from the 2x400Gb OSFP module when it runs continuously?
The transceiver operates at 850 nm over multi-mode fiber with a 50 m reach; power draw and thermal output are defined by the 400GBase-SR8 specification for OSFP form factor.
What cabling and connectors must I already have to install this transceiver?
You need multi-mode fiber patch cords with MPO-12 connectors on each end to match the two 400GBase-SR8 ports.
Will this 800 Gbit/s OSFP transceiver link with my existing 400G QSFP-DD switches?
The module presents two 400GBase-SR8 interfaces; interoperability depends on the switch port supporting the same SR8 optical lane configuration.
More in SFP & SFP+ Transceiver Modules
Similar items
NVIDIA MMS4X00-NM 800Gbps 2xNDR OSFP 2xMPO 1310nm SMF 500m finned SFP transceiver
- OSFP
- Transceiver
HPE JD089B Gigabit Ethernet SFP Transceiver 1000Base-T RJ-45
- Transceiver
- HCRP, SPP
NVIDIA MMS1W50-HM 200Gb/s QSFP56 1310nm FR4 SFP transceiver
STARTECH MASFP10GBLR SFP+ transceiver 10GBASE-LR 10km 1310nm LC
- Transceiver
- IEEE 802.3ae 10 Gbi…
HP J9151D SFP+ transceiver 10GBase-LR LC 10 km
- Transceiver
- TCP/IP





