Battery Technology Inc. ET-LAD60W-BTI projector lamp 330 Watt 2000 Hrs
- 330 W
- 2,000 Hrs.
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 200 W P-VIP replacement lamp module with 2,000-hour rated life, supplied fully assembled for straightforward installation
The Optoma BL-FP200D is a 200 W replacement projector lamp module that arrives with the bulb already fitted in its housing. It is intended for owners of compatible Optoma projectors who need a new lamp to restore brightness and colour accuracy. The unit is supplied new and ready to install without additional assembly.
The lamp is rated for approximately 2,000 hours of operation at its rated wattage. Brightness will gradually decline as the bulb ages, and the projector will typically indicate when replacement is due. Running the lamp beyond the rated life increases the risk of premature failure or reduced image quality, so plan for a change around the 2,000 hour mark.
Because the bulb comes pre-mounted in the housing, installation usually takes only a few minutes with basic tools. The most frequent issues are forgetting to reset the projector’s lamp-hour counter after fitting the new module and touching the glass envelope with bare fingers, which can create hot spots and shorten life. Handle the lamp by the housing only and follow the projector’s reset procedure.
Measured against everything we stock in Replacement Projector Bulbs, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | Projector Lamp |
| Display | |
| Lamp lifespan | 2,000 Hrs. |
| Power | |
| Power rating | 200 W |
All four versions use genuine OEM parts and meet ISO 9001 standards; the OEM versions come from Philips, Osram, Ushio or Phoenix, while the compatible version is a lower-cost alternative from a leading third-party maker.
It is the manufacturer's rated average life at full 200 W brightness; actual hours will vary with operating mode, ventilation and how often the projector is power-cycled.
The lamp is built to ISO 9001 quality processes and tested for beam performance, ignition voltage and run-time, ensuring it matches the projector's original optical specification.
More in Replacement Projector Bulbs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?