Battery Technology Inc. ET-LAD60W-BTI projector lamp 330 Watt 2000 Hrs
- 330 W
- 2,000 Hrs.
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 280 W replacement lamp module with 2,000 to 3,000 hour life, supplied as a complete housing for quick installation
The Optoma BL-FP280C is a new replacement projector lamp module supplied with a pre-assembled Osram P-VIP 280W bulb and housing. It is designed for users who need to restore brightness to a compatible Optoma projector without sourcing separate components. Buyers who require a bare bulb without the housing will not find that option here.
Rated life is 2,000 hours in Normal mode and 3,000 hours in Economy mode, so actual runtime depends on which projector setting is selected. The 280W rating defines the power draw and light output; projectors that call for a different wattage cannot use this module. No other interface or standard limits compatibility beyond the projector's own lamp specification.
The unit arrives fully assembled, so installation consists of opening the projector's lamp door, removing the old module and sliding the new one into place. Most problems arise when the lamp door interlock switch is not fully engaged or when the projector's lamp-hour counter is not reset after fitting, which can leave the unit in a warning state.
Measured against everything we stock in Replacement Projector Bulbs, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | Projector Lamp |
| Display | |
| Lamp lifespan | 2,000 (Normal) - 3,000 (Economy) Hrs. |
| Power | |
| Power rating | 280 W |
All four versions fit the BL-FP280C housing and meet ISO9001 quality checks; the OEM options use bulbs from Philips, Osram, Ushio, Phoenix, Iwasaki or Matsushita, while the compatible version uses genuine OEM parts from a leading third-party maker.
The lamp draws 280 watts, delivering the light output the projector was designed for; expect the same brightness as the original lamp and similar cooling requirements.
The P-VIP 280W bulb is built to the projector's voltage and ignition spec, giving 2,000 hours in normal mode or 3,000 hours in economy mode.
More in Replacement Projector Bulbs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?