Battery Technology Inc. ET-LAD60W-BTI projector lamp 330 Watt 2000 Hrs
- 330 W
- 2,000 Hrs.
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 220 W replacement lamp module rated for 2,000 hours of use, supplied with a new Philips UHP bulb pre-assembled in its housing for direct installation
The DP7259 module ships as a fully assembled 220W bulb inside its housing so it fits straight into compatible Optoma projectors without extra assembly. It uses a Philips UHP lamp rated for 2,000 hours of operation and is built to ISO9001 quality standards. Buyers who need a higher-wattage lamp or a different connector type should look elsewhere.
When the original lamp reaches its rated 2,000-hour life the projector will dim or warn for replacement; this module restores factory brightness in a single swap. The jump is worth it when image quality has dropped noticeably or the projector refuses to start because the hour counter has expired. It is not for users who want a longer-life lamp or a brighter upgrade beyond the original specification.
The lamp draws 220W and relies on UHP discharge technology so brightness and colour stability follow that standard's inherent curve over the 2,000-hour span. The sealed housing means the bulb cannot be serviced separately and the module must be recycled as a unit at end of life. Projectors that require a different wattage or form factor cannot accept this part.
Measured against everything we stock in Replacement Projector Bulbs, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | Projector Lamp |
| Display | |
| Lamp lifespan | 2,000 Hrs. |
| Power | |
| Power rating | 220 W |
The DP7259 lamp module is built as a direct replacement for Optoma projectors that use the SP.86S01GC01 part number, so it fits the same chassis and connector layout as the original lamp.
Power off the projector and let it cool completely, remove the lamp cover, unscrew the old module, insert the new DP7259 assembly until it seats firmly, replace the screws and cover, then reset the lamp timer in the projector menu — skipping the timer reset is the step most users forget.
The lamp is rated for 2000 hours of use; after that the brightness drops and the projector will prompt for a new lamp, so keep a spare DP7259 module ready for a quick swap.
More in Replacement Projector Bulbs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?