Battery Technology Inc. ET-LAD60W-BTI projector lamp 330 Watt 2000 Hrs
- 330 W
- 2,000 Hrs.
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 200 W Osram P-VIP lamp module rated for 3,000 hours normal or 4,000 hours economy use
The Optoma SP.8FE01GC01 is a new projector lamp module supplied with a 200 W Osram P-VIP bulb already fitted in its housing. It is designed for owners of compatible Optoma projectors who need a ready-to-install light source when the original lamp reaches end of life.
The unit arrives as a complete lamp-and-housing assembly, so no separate bulb handling or alignment is required during installation. Manufacturing follows ISO 9001 quality checks covering beam performance, ignition voltage, connections and run-time to ensure reliable operation in daily use.
Replacing a dimmed or expired lamp with this module returns the projector to its factory light output for up to 3,000 hours in normal mode or 4,000 hours in economy mode. It is not suited for users who require a higher-wattage light engine or a different lamp technology than the specified 200 W P-VIP design.
Measured against everything we stock in Replacement Projector Bulbs, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | Projector Lamp |
| Display | |
| Lamp lifespan | 3,000 (Normal) - 4,000 (Economy) Hrs. |
| Power | |
| Power rating | 200 W |
The module uses a 200W Osram P-VIP bulb, which determines the light output and power draw of the replacement lamp.
It is supplied as a fully assembled bulb and housing, so no separate cage installation is required before fitting it to the projector.
Power off and cool the projector, open the lamp door, release the securing screws, swap the module, re-tighten the screws, close the door, then reset the lamp-hour counter in the menu — the reset is the step most often forgotten.
More in Replacement Projector Bulbs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?