OVVNYXE
OVVNYXE 30 Bags & Auto Pump Filament Storage Kit 32x34cm 60KPA 30pcs
Stores up to thirty 1 kg filament spools in 32 by 34 cm vacuum bags with a 60 KPA automatic pump and reusable desiccants
- Product colorTransparent
- Main materialMoisture-resistant plastic
- Product weight2.2 lb (1 kg)
- 30 vacuum bags plus pump store multiple spools efficiently
- 32 by 34 cm size fits 1 kg rolls and four smaller spools
- 60 kPa auto pump removes air in seconds for fast sealing
- 30 reusable desiccants absorb moisture without cobalt chloride
- 5 seal clips reinforce closure for long-term airtight storage
OVVNYXE 30-bag filament storage kit
The OVVNYXE kit supplies 30 transparent moisture-resistant bags, an automatic 60 KPA pump, 30 reusable non-toxic desiccants and five sealing clips. Each bag measures 32 by 34 centimetres and is sized to hold a standard 1 kg spool or up to four smaller 200 to 250 gram rolls. The kit is intended for makers who need to keep filament dry and dust-free without relying on a separate dryer box.
Sealing performance and pump operation
The 60 KPA automatic pump evacuates a bag in seconds, removing air and moisture more forcefully than typical consumer vacuum pumps. Bags are constructed to be stronger and more airtight than ordinary food vacuum pouches, reducing the chance of stringing, clogging or layer-adhesion issues caused by damp filament. After vacuuming, users are advised to smooth the valve and avoid impact to maintain the seal.
Daily handling and reusability
The 2.2-pound kit includes enough desiccant packs and clips for all 30 bags, and the desiccants contain no cobalt chloride. Clips can be reused to reseal bags multiple times, while the pump runs from an included charging cable. The transparent material lets you identify spools at a glance, and the bag dimensions fit 99.99 percent of common 1 kg filament brands on the market.
How it compares
Measured against everything we stock in 3D Printer Filament, at today’s prices. Recalculated every night.
- Price $45.99
- Pricier than about 78% of the 305 comparable items (median $27.99).
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | OVVNYXE |
| Model name | 30 Bags & Auto Pump |
| Product color | Transparent |
| Size & build | |
| Main material | Moisture-resistant plastic |
| Product weight | 2.2 lb (1 kg) |
Questions about this item
How do I install the 32x34cm bag and auto pump, and which step do people often get wrong?
Place the spool and one desiccant inside, seal the strip left to right with a clip — repeat several times to confirm it is secure — then press the pump onto the valve, turn it on, and smooth the valve gently to remove air bubbles.
What maintenance or replacement will the kit need later?
The 30 reusable desiccants can be regenerated when saturated; the 5 seal clips and the 60 KPA auto pump with its charging cable are reusable, while the 30 bags are replaced once their seal integrity declines.
What limit appears first under sustained use?
The 60 KPA suction rating defines the maximum vacuum level; if a bag develops micro-leaks or the valve seal fatigues, the pump cannot exceed this pressure to maintain dryness.
More in 3D Printer Filament
Similar items
SUNLU High Speed PLA+ 2.0 Filament 1.75mm Black 2kg
- 2kg Black+black
- High Speed PLA, 3D…
ANYCUBIC PLA Filament 1.75mm 2×1kg Texture Grey
- 2 × 1kg Pla Texture…
- Polylactic Acid
Anycubic PLA+ Filament 1.75mm 2kg Texture Grey
- 2kg Pla+ Texture Gr…
- Polylactic Acid





