Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16 GB DDR5 ECC registered RDIMM running at 4800 MT/s with CL40 latency for servers and workstations
This 16 GB DDR5 4800 module is an ECC Registered DIMM built for workstations and servers. It runs at 1.1 V with CL40 latency and a 1Rx8 organisation. The 288-pin form factor fits DDR5 server platforms that require registered memory with error correction.
The module is a direct replacement for the Samsung part number M321R2GA3BB6-CQK and matches its JEDEC-standard PC5-38400 specification. Upgrading is worthwhile when expanding capacity in a compatible server or when a failed DIMM must be swapped for a validated, ROHS-compliant alternative.
This memory suits administrators maintaining DDR5 servers or workstations that mandate registered ECC DIMMs and cannot use unbuffered or load-reduced modules. It will not work in standard desktop computers or in systems that require unbuffered ECC or non-ECC memory. Builders needing mixed-rank configurations or higher-density modules should look elsewhere.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | OWC |
| Part number | 4R8D51R816 GB |
| Total capacity | 16 GB |
| Product type | 288-Pin DDR5 ECC RDIMM |
| Performance | |
| Rated speed | DDR5 4800 (PC5 38400) |
| Memory | |
| CAS latency | CL40 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 1Rx8 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.1 V |
No, this registered ECC module requires a workstation or server board that supports RDIMM memory; standard desktop boards only accept unbuffered DIMMs.
Align the notch with the slot key, press firmly until both retention clips click, then verify the module height is even; the step often missed is confirming both clips have fully engaged.
No firmware updates are needed for the memory itself; ensure the system BIOS is current for DDR5 4800 support, and reseat modules only if errors appear during routine diagnostics.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?