Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16 GB DDR4 3200 ECC registered RDIMM with CL22 latency and 1.2 V operation for server upgrades
This 16GB DDR4 3200 ECC registered DIMM targets workstations and servers that require error-correcting memory. It will not work in standard desktop platforms and must not be mixed with unbuffered modules. The 288-pin module runs at 1.2V with CL22 latency and a 2Rx8 organisation.
The stick plugs into a 288-pin DDR4 slot and draws 1.2V from the motherboard. No heat spreader is fitted, so airflow across the PCB is necessary. Systems must support registered ECC memory; unbuffered consumer boards will not POST with this module installed.
JEDEC-compliant timings and ECC correction maintain data integrity during continuous operation. Registered signalling reduces electrical load on the memory controller when multiple DIMMs are populated. The module is validated for long-term server workloads rather than short benchmark runs.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | OWC |
| Part number | 3R2D42R816 GB |
| Total capacity | 16 GB |
| Product type | 288-Pin DDR4 ECC RDIMM |
| Performance | |
| Rated speed | DDR4 3200 (PC4 25600) |
| Memory | |
| CAS latency | CL22 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx8 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.2 V |
The module operates at CL22, which sets the timing floor for every access once the system is under continuous load.
It runs at the standard 1.2 V for DDR4 registered memory and has no heat spreader, so it depends on normal chassis airflow through the DIMM slots.
The system needs a 288-pin DDR4 registered DIMM slot and a platform that supports ECC registered memory; standard desktop boards that only accept unbuffered modules will not work.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?