Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
8GB DDR3 1333 ECC registered server memory module with CL9 latency and 1.5V operation
This 8 GB DDR3 module is built for workstations and servers that require ECC registered memory. It operates at 1333 MHz with CL9 latency and a 1.5 V supply. The 2Rx4 dual-rank organisation suits multi-slot configurations where registered buffering is mandatory.
The standard 240-pin RDIMM layout fits server mainboards designed for registered ECC DDR3. No heat spreader is fitted, so airflow across the PCB is unimpeded in dense chassis. JEDEC and RoHS compliance confirms the module meets baseline electrical and environmental specs for warranty-safe upgrades.
Check that your platform explicitly accepts DDR3 registered ECC RDIMMs; standard desktop boards will not post with this module. Do not mix registered and unbuffered DIMMs in the same system. Confirm the memory controller can address 2Rx4 modules at the required speed before ordering.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | OWC |
| Part number | 1R3D32R408 GB |
| Total capacity | 8 GB |
| Product type | 240-Pin DDR3 ECC RDIMM |
| Performance | |
| Rated speed | DDR3 1333 (PC3 10600) |
| Memory | |
| CAS latency | CL9 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.5 V |
The module runs at 1333 MT/s with a peak bandwidth of PC3-10600 and a CAS latency of 9 cycles, so sustained throughput is capped by the DDR3-1333 JEDEC ceiling.
It needs a standard 240-pin DDR3 DIMM socket; the registered 2Rx4 design adds a register chip but keeps the same height as a plain DDR3 module, so no extra clearance is needed.
Power down, open the chassis, align the notch on the 240-pin edge connector, press firmly until both latches click, then verify in BIOS that ECC and registered mode are enabled — skipping the BIOS check is the step most people forget.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?