Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
8 GB DDR3 ECC registered server DIMM running at 1333 MHz with CL9 latency and 1.5 V operation
This OWC module provides 8 GB of DDR3 memory at 1333 MHz with CL9 latency and 1.5 V operation. It uses a 240-pin registered design with ECC and a 2Rx4 rank configuration. The part is fully JEDEC and ROHS compliant and matches Dell part numbers A4051416, A4051431, A4105734, A4188260 and A4188265.
Suitable for systems that require registered ECC DDR3 DIMMs and can accept 2Rx4 modules. It will not work in standard desktop computers that use unbuffered non-ECC memory. Buyers needing unbuffered DIMMs or a different voltage should look elsewhere.
The module is registered and ECC-enabled with a 2Rx4 rank layout. This specification determines compatibility with the target server or workstation platform. Verify that your system supports registered ECC DDR3 and the 2Rx4 organisation before purchase.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | OWC |
| Part number | 1R3D32R408 GB |
| Total capacity | 8 GB |
| Product type | 240-Pin DDR3 ECC RDIMM |
| Performance | |
| Rated speed | DDR3 1333 (PC3 10600) |
| Memory | |
| CAS latency | CL9 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.5 V |
Align the module key notch with the slot key, press straight down until both retention clips click. The common mistake is forcing an unbuffered DIMM into a registered slot or mixing registered and unbuffered modules, which prevents boot.
No routine maintenance is required. Replace the module only if memory diagnostics report correctable ECC errors that become uncorrectable, or if a DIMM fails POST testing after a firmware update.
The 1333 MT/s data rate and CL9 latency set the throughput ceiling; sustained heavy loads will saturate bandwidth before the 1.5V supply or thermal limits become a factor.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?