Battery Technology Inc. ET-LAD60W-BTI projector lamp 330 Watt 2000 Hrs
- 330 W
- 2,000 Hrs.
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 220 W replacement lamp module with a new Philips UHM bulb and housing, ready to install in a Panasonic projector and rated for 2,000 to 3,000 hours of use
This 220W module fits Panasonic PT-LB78V projectors using the ET-LAB80 part number. It arrives as a complete bulb-and-housing assembly so installation requires no extra tools or alignment steps. The unit is supplied new and tested to ISO9001 quality standards for ignition, voltage and run-time consistency.
Swap this module in when the existing lamp reaches the end of its rated life or when brightness drops below usable levels. The change is worth it if the projector shows a replacement warning, exhibits colour shift or fails to strike reliably. A fresh 220W lamp restores the projector's original light output without needing a new projector purchase.
In normal mode the lamp is rated for 2,000 hours; economy mode extends the estimate to 3,000 hours. This headroom covers daily classroom or meeting-room use for multiple years before another change is needed. Heavy continuous operation or high ambient temperatures will reduce the practical interval toward the lower figure.
Measured against everything we stock in Replacement Projector Bulbs, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | Projector Lamp |
| Display | |
| Lamp lifespan | 2,000 (Normal) - 3,000 (Economy) Hrs. |
| Power | |
| Power rating | 220 W |
The PT-LB78V is a fully assembled 220W bulb-and-housing module built to the ET-LAB80 specification, so it seats directly in the projector's lamp compartment without extra brackets.
Power off and unplug the projector, let it cool completely, remove the lamp cover, slide the module in until the connector seats firmly, replace the cover, then reset the lamp timer in the menu — skipping the timer reset is the step most often missed.
In Normal mode the lamp is rated for 2000 hours; switching to Economy mode extends the rating to 3000 hours before a replacement module is required.
More in Replacement Projector Bulbs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?