Battery Technology Inc. ET-LAD60W-BTI projector lamp 330 Watt 2000 Hrs
- 330 W
- 2,000 Hrs.
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A ready-to-install 280W PT-VW435NU lamp module rated for 2,500 normal or 4,000 economy hours
The Panasonic PT-VW435NU lamp ships as a complete 280 W bulb-and-housing assembly matched to the ET-LAV200 specification. It is intended for owners of the PT-VW435NU projector who need a direct replacement without sourcing a bare bulb. The module arrives new and pre-aligned for immediate use.
A fresh module replaces a lamp that has reached the end of its rated 2 500-hour normal or 4 000-hour economy lifespan. The upgrade is worth it when image brightness has faded, colour balance has shifted or the projector warns that lamp hours are exceeded. It returns the projector to factory light output without changing any settings.
Installation consists of opening the projector lamp door, removing the old housing and sliding the new module into place until it seats firmly. No bulb handling, focus adjustment or software reset is required beyond the projector’s own lamp-hour counter. The most common issue is forgetting to reset that counter after installation, which leaves the replacement warning active.
Measured against everything we stock in Replacement Projector Bulbs, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | Projector Lamp |
| Display | |
| Lamp lifespan | 2,500 (Normal) - 4,000 (Economy) Hrs. |
| Power | |
| Power rating | 280 W |
Yes, the lamp is supplied as a complete 280 W module with the Ushio NSHA bulb already fitted in the housing, ready for direct insertion.
Power off the projector, unplug it, allow it to cool, remove the lamp cover, release the retaining screws, slide the old module out, insert the new ET-LAV200 until it seats firmly, re-tighten the screws, replace the cover, plug in, power on, then reset the lamp timer in the menu — the timer reset is the step most frequently forgotten.
The lamp is rated for 2,500 hours in normal mode or 4,000 hours in economy mode; plan replacement when the projector warning appears or image brightness drops noticeably.
More in Replacement Projector Bulbs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?