Perle 05051220 C-100-M2LC2 SFP transceiver
Fast Ethernet media converter module with one LC duplex and one RJ-45 port extending links up to 1.24 miles
- Port count1 x LC Duplex Network 1 x RJ-45 Network
- Maximum range1.24 Mile
- HighlightsNetwork Technology:10/100Base-TX 100Base-FX
- Connect copper to fibre with LC and RJ-45 ports
- Extend network reach up to 1.24 miles over fibre
- Transparent link via Auto-Negotiation and Link Pass-Through
- Reduce on-site maintenance with Far End Fault detection
- Hot-swappable SFP module fits high-density Perle chassis
Fast-Ethernet Copper-to-Fiber Transceiver
The Perle C-100-M2LC2 converts a single 10/100Base-TX RJ-45 port to 100Base-FX over LC duplex fiber. It is built for network administrators who need to extend legacy Fast Ethernet links beyond copper distance limits. The module installs in a high-density Perle Media Converter Chassis for rack-mounted deployments.
Sustained Link Transparency
Auto-negotiation and auto-MDIX handle speed and polarity without manual setup, while link pass-through and far-end fault propagate link status across the fiber segment. Pause frame support preserves flow control during continuous traffic, so the converter does not become a bottleneck under prolonged load. These features keep the end-to-end connection transparent for troubleshooting.
Chassis and Fiber Compatibility Check
Verify that a Perle Media Converter Chassis with a free slot is available for installation. Confirm the remote endpoint uses 100Base-FX optics with LC duplex connectors and that the fiber run does not exceed 1.24 mile. Ensure the copper side operates at 10 or 100 Mbps, as gigabit speeds are not supported.
How it compares
Measured against everything we stock in SFP & SFP+ Transceiver Modules, at today’s prices. Recalculated every night.
- Price $150.99
- Typical for this category: the median of 1,470 items is $138.49.
New to this? Buying networking gear with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Perle |
| Model name | C-100-M2LC2 |
| Connectivity | |
| Maximum range | 1.24 Mile |
| Ports & slots | |
| Port count | 1 x LC Duplex Network 1 x RJ-45 Network |
| Size & build | |
| Shipping weight | 0.43 kg |
| Package size | 210 × 152 × 44 mm |
Questions about this item
Does the 100Base-FX transceiver generate noticeable heat or noise during continuous 24-hour operation?
The module has no moving parts and runs passively, so it adds minimal heat and produces no audible noise inside a Perle Media Converter Chassis.
What chassis and fiber patch cable must I already have to install this C-100-M2LC2 module?
You need a compatible Perle Media Converter Chassis with an open slot and a duplex LC multimode fiber patch cable to reach the 1.24 mile distance.
Will this 10/100Base-TX to 100Base-FX converter work with my existing 10 Mbps hubs and switches?
Yes, the RJ-45 port auto-negotiates down to 10 Mbps half or full duplex, so legacy 10Base-T equipment connects transparently.
More in SFP & SFP+ Transceiver Modules
Similar items
Finisar Corporation FTLX1475D3BCV 10GBase-LR 1000Base-LX Dual Rate 10 km 1310 nm SFP transceiver
HPE JD089B Gigabit Ethernet SFP Transceiver 1000Base-T RJ-45
- Transceiver
- HCRP, SPP
Tripp Lite N785-001-LC-MM 10/100/1000 LC Duplex 850nm 550m Media Converter
- Side A - Connector…
- Converter
AddOn J4858C-AO SFP transceiver 1000Base-SX 850nm 550m LC
- Transceiver
- TCP/IP
PC Wholesale JD061A 1000BASE-LX SFP Transceiver 1310nm 40km
- 1000Base-LX
- Transceiver





