Phobya 1012263 Y-Cable 4-Pin PWM to 4-Pin PWM & 4-Pin Molex 50cm
A PWM Y-splitter powers two fans from one motherboard header while drawing extra current through a Molex connector, 50 cm long with black sleeving and heatshrink
- Product colorBlack
- Key featuresSince the controlling fans via the Mainboard with PWM is muc
- Splits one PWM header to drive two fans
- Molex power tap offloads current from the motherboard
- 50 cm length fits most mid-tower routing paths
- Black sleeving and heatshrink protect against abrasion
- All-black connectors keep the build visually consistent
PWM Fan Splitter for Motherboard Control
This Phobya Y-cable lets two 4-pin PWM fans run from a single motherboard header while drawing power through a 4-pin Molex connector. It suits builders who want PWM speed control without buying a dedicated fan controller.
Sustained Operation with Sleeved Protection
The 50 cm length is fully covered in black Flexsleeves that guard against abrasion during continuous use. Heat-shrink tubing at each connector end keeps the termination tidy and reduces strain on the wires over long periods.
Simple Installation with One Limitation
Plug the 4-pin PWM lead into the motherboard header, connect two PWM fans to the splitter ends, and attach the Molex plug to the power supply. The cable cannot supply PWM control to fans that lack a 4-pin PWM input.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $11.99
- Cheaper than about 65% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Phobya |
| Model name | 1012263 |
| Product color | Black |
Questions about this item
Does the 50 cm Phobya 1012263 Y-cable add any heat or noise when running fans continuously?
The cable itself is passive wiring with sleeved conductors and heat-shrink ends, so it does not generate heat or audible noise; only the connected fans produce sound and warmth.
What motherboard header and power supply connector are required to use the Phobya 1012263 splitter?
You need one free 4-pin PWM fan header on the motherboard and one spare 4-pin Molex connector from the power supply to feed the two attached fans.
Will the Phobya 1012263 splitter work with older 3-pin fans I already own?
The splitter provides two 4-pin PWM outputs; 3-pin fans will fit mechanically but will run at fixed voltage without PWM speed control from the motherboard header.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister PS VR2 Controller Charger Station internal power cable
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





