Phobya 3-Pin Fan 12V to 7V Voltage Reducer 20cm Black Cable Extension 81068
Reduces a 12 V fan to 7 V for quieter operation using a 20 cm black 3-pin cable
- Cable length7.9 in (20.1 cm)
- Product colorBlack
- Reduces fan voltage from 12V to 7V for quieter operation
- 20 cm black cable fits tight case routing
- 3-pin connector matches standard case fans
- Lowers power draw on high-load rigs
- Simple inline adapter needs no software setup
Voltage reducer for 12V fans
This 20 cm cable lowers the supply from 12 V to 7 V for a standard 3-pin fan. The reduced voltage slows the fan for quieter operation and lower power draw. It suits builders who want a simple way to calm noisy cooling without fan controllers. The black sleeve keeps the wiring tidy inside the case.
Check connector and voltage needs
Verify that the fan you intend to run uses a 3-pin header and is rated for 12 V operation. The reducer plugs between the motherboard or controller header and the fan lead. Ensure the 7.9 in length reaches your routing path without strain. Fans requiring full 12 V for start-up torque may not spin reliably at the reduced level.
Fixed 7V output and short reach
The cable provides a single, non-adjustable 7 V step-down with no software or hardware control. It adds no monitoring, PWM conversion or additional headers. The 20 cm extension simply bridges the gap between header and fan while dropping voltage. Builders needing variable speed or longer runs must look elsewhere.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $7.99
- Cheaper than about 91% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | Black |
| Size & build | |
| Cable length | 7.9 in (20.1 cm) |
Questions about this item
Does the 81068 cable include the fan itself or only the voltage reducer?
Only the voltage reducer cable is included; the 12V fan must be purchased separately.
How do I know if the 20cm length suits my build?
The 20cm (7.9 in.) cable connects a 3-pin fan header to the fan, so measure that distance inside your case before ordering.
What does the 12V to 7V reduction do for a running system?
It lowers the fan speed, cutting noise and power draw while still delivering airflow for cooling.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister USB to 25 Pin DB25 Parallel Printer Cable Adapter
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





