Phobya 4-Pin Molex Extension 90cm Black 87489
Black sleeved 4-pin Molex extension cable measuring 90cm for internal power routing
- Cable length3 ft (0.91 m)
- Product colorBlack
- Extends power reach with 90 cm length
- Black sleeved cable matches dark-themed builds
- Standard 4-pin Molex connector fits legacy devices
- Flexible routing for tidy cable management
- New condition ensures reliable power delivery
4-Pin Molex Extension 90 cm
This Phobya cable extends a standard four-pin Molex power connection by ninety centimetres. The black sleeved jacket keeps the wire bundle tidy inside a chassis. It is aimed at builders who need extra reach between a power supply and a Molex-driven device.
Suits single-device Molex runs.
The extension carries one male and one female Molex plug, so it lengthens a single lead without adding branches. Builds that require several Molex outlets from one PSU cable, or that need right-angle plugs for tight clearances, should look at a different cable style.
Deciding spec: ninety-centimetre length
At exactly ninety centimetres the cable bridges the gap between a bottom-mounted PSU and a mid-tower drive bay or fan controller. Measure the routing path in your case; if the run is shorter or longer, choose a different length to avoid slack or tension.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $10.99
- Cheaper than about 70% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | Black |
| Size & build | |
| Cable length | 3 ft (0.91 m) |
Questions about this item
Will the 90 cm length reach from my PSU to a drive mounted at the bottom of a full-tower case?
At 90 cm the cable spans most full-tower layouts, giving enough slack to route behind the motherboard tray and down to a bottom-mounted drive bay.
Does the 4-pin Molex connector follow the standard pinout so it works with any Molex device?
Yes, it uses the industry-standard 4-pin Molex pinout, so it will power any drive or fan that accepts a regular Molex plug.
Is the sleeved black cable flexible enough to bend around tight corners behind the motherboard tray?
The sleeved construction remains pliable, allowing clean 90-degree bends in the narrow space behind the motherboard tray without kinking.
More in Internal PSU & Riser Cables
Similar items
Nippon Labs POW-04412 12" Molex 5.25 Female to Female internal power cable
- 1 ft (0.3 m)
- Multi-Color
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





