RCA VHB6111N 100 ft RG-6 coaxial rf cable black
- Digital RG6 Coaxial…
- Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Six-foot 50 Ohm RG8X coaxial jumper with UHF male connectors for CB and ham radio up to 300 MHz
This 6 ft coaxial jumper uses RG8X construction with a pure copper centre conductor and double shielding to minimise signal loss. Nickel-plated brass UHF PL259 connectors with gold-plated centre pins provide a secure 50 Ohm path for transceivers, analysers and SWR meters. The flexible PVC jacket is rated for indoor and outdoor use. It suits operators who need a ready-made, low-loss link between radio and antenna.
The moulded PL259 plugs are specified for operation up to 300 MHz, so performance above that range is not guaranteed. RG8X dielectric and shielding are optimised for HF and VHF bands rather than microwave frequencies. Installers running UHF or higher bands should verify insertion loss before committing to long runs. The cable is not characterised for frequencies beyond the stated connector rating.
The 17 AWG centre conductor handles higher power levels than the thinner RG58 alternative, giving extra headroom for CB and HAM transmitters. At 50 Ohms it matches standard antenna systems without mismatch loss. Very long runs or frequencies near the 300 MHz ceiling will still show measurable attenuation, so users needing minimal loss over extended distances should consider larger-diameter coax.
Measured against everything we stock in Coaxial RF & Antenna Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | Other |
The 6ft cable suits short connections between a radio and an antenna tuner or SWR meter; longer runs would need a different length not offered here.
It matches standard CB and ham transceivers so reflected power stays low and the SWR meter reads accurately.
The nickel-plated brass connectors with gold-plated centre pins are rated up to 300 MHz, so performance is specified through the VHF and low-UHF bands.
More in Coaxial RF & Antenna Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?