PrimoChill Dual Male G1/4 Straight Coupler SX Sky Blue diy cooling
Connects two female G1/4 fittings with a 20 mm brass coupler in a sky-blue finish
- Product typeFittings
- Connects two female G1/4 ports with a male-to-male thread
- Brass construction resists corrosion in liquid-cooling loops
- Sky-blue SX finish adds a coordinated colour accent
- Low 20 mm installed height fits tight tubing runs
- Threaded section measures 10 mm for precise spacing
G1/4 Brass Extension Coupler
The PrimoChill Dual Male G1/4 Straight Coupler connects two female G1/4 threaded fittings in a custom liquid-cooling loop. Its solid brass body provides durable, corrosion-resistant sealing for DIY builders. The SX Sky Blue finish adds a consistent colour accent across the system.
Builders joining female ports
This coupler suits anyone needing to bridge two female G1/4 components such as radiators, blocks or reservoirs. It does not serve builds that require angled routing, rotary adjustment or a reduction to a smaller thread size.
Compact 10 mm body with 20 mm overall length
The short profile fits tight spaces between components while maintaining full thread engagement. Headroom is limited to straight inline connections; offsets or multi-port distribution need different fittings.
How it compares
Measured against everything we stock in Heatsinks & Water Blocks, at today’s prices. Recalculated every night.
- Price $12.99
- Cheaper than about 63% of the 609 comparable items (median $15.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product type | Fittings |
Other versions of this model
5 more in the same range
PrimoChill Male to Female G 1/4in 15mm SX Extension Coupler diy cooling
- CPU Block
PrimoChill Male to Female G 1/4in 35mm SX Extension Coupler diy cooling
- CPU Block
PrimoChill Dual Female G1/4 Straight Coupler Nickel Silver 16mm x 18.5mm
- Fittings
Questions about this item
What thread size must my existing fittings have to connect with this G1/4 coupler?
Your fittings need G1/4 threads; the coupler has dual male G1/4 threads so it joins two female G1/4 ports directly.
Will the 20 mm overall height clear the space between my current water-block and reservoir?
The coupler measures 20 mm with threads and 10 mm without, so measure the gap between components to confirm clearance.
How can I verify the seal is leak-free after installing the brass coupler?
Pressurise the loop slowly and watch each G1/4 joint for drips; a dry brass coupler with no moisture at the threads confirms a good seal.
More in Heatsinks & Water Blocks
Similar items
Silverstone SST-TP02-M2 M.2 2280 DIY cooling kit
- M.2 length support:…
- Heatsink : 70 mm (W…
ENERMAX ESC001-BK M.2 2280 NVMe SSD Heatsink DIY Cooling
- Material: Aluminum,…
- SSD Heatsink
Corsair CW-9060056-WW 2.1" 480x480 IPS LCD Upgrade Kit diy cooling
- Display Upgrade Kit
- Black
Thermaltake Pacific DP100-D5 Plus Distro Plate Pump Combo 200ml 360mm 18 LED CL-W263-PL00SW-A
- 360 (L) x 120 (W) x…
- 200 ml
Barrow Mods G1/4" 90 Degree Female-Female Dual Rotary Angled Fitting - Black
- Fittings










