PrintOxe Dark Green PLA Filament 1.75 mm 1 kg ±0.03 mm
1 kg spool of 1.75 mm dark-green PLA with ±.03 mm accuracy, vacuum-sealed with desiccant, prints at 180-210 °C
- Diameter1.75 mm
- Product colorDark Green
- Main materialPLA
- Product weight2.2 lb (1 kg)
- Consistent layers from ±0.03 mm accuracy
- Ready to print after vacuum-sealed dry storage
- Broad printer fit with 180–210 °C range
- Standard 1.75 mm diameter fits common extruders
- Full 1 kg spool for extended projects
Filament specs and target users
This PrintOxe PLA filament comes in a dark green colour with a 1.75 mm diameter and ±0.03 mm dimensional accuracy. The 1 kg spool is vacuum sealed with desiccant to protect against moisture. It suits hobbyists and makers who need consistent extrusion on common desktop 3D printers.
Upgrade from lower grade filament
Switching from filament with looser tolerances or no moisture barrier reduces clog risk and improves layer adhesion. The jump is worth it when print failures trace back to diameter variation or absorbed humidity rather than slicer settings or hardware limits.
Installation notes and common issues
The spool dimensions are 7.80 inch diameter, 2.56 inch width and a 2.20 inch hub hole, fitting most standard holders. Recommended nozzle temperature is 180 °C to 210 °C. Common issues include slight colour variation from monitor images and the need to dry the spool if the seal is broken before use.
How it compares
Measured against everything we stock in 3D Printer Filament, at today’s prices. Recalculated every night.
- Price $55.99
- Pricier than about 86% of the 305 comparable items (median $27.99).
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | PrintOxe |
| Product color | Dark Green |
| Size & build | |
| Main material | PLA |
| Diameter | 1.75 mm |
| Product weight | 2.2 lb (1 kg) |
Questions about this item
Will the 7.80" spool diameter and 2.20" hub hole fit my printer's filament holder?
The spool measures 7.80 inches in diameter, 2.56 inches wide, with a 2.20 inch hub hole; verify your printer's holder accepts these dimensions before use.
What nozzle temperature should I set for the first layer to avoid under-extrusion?
Start between 180°C and 210°C; many users print the first layer at the higher end of this range to ensure good adhesion and flow.
How should I store the filament after opening the vacuum-sealed bag to prevent moisture absorption?
Return the spool to a sealed container with fresh desiccant after each use; PLA absorbs humidity quickly, which degrades print quality over time.
More in 3D Printer Filament
Similar items
SUNLU Silk PLA+ Filament Bundle 1.75mm 2kg 8 Spools
- Silk Small Spool -…
- Silk Multicolor Bun…
SUNLU High Speed PETG Filament 1.75mm 4kg White 4-pack
- 4kg White+white+whi…
- Polyethylene Tereph…
SUNLU PLA+ 2.0 Filament 1.75mm 4kg Black
- 1kg*4 Black+black+b…
- PLA+2.0 Filament





