RIITOP PWM1T10-D PWM Fan Hub 1 to 10 Ports 40cm
Expands one motherboard PWM header to ten fan ports with Molex power for stable operation
- Cable length1.31 ft (40 cm)
- First connector1x TX4 male
- Second connector10x TX4 Male
- Connector count10
- Connector detailsPWM Fan Hub 1 to 10 Fans Conotroller Splitter
- Product typeCable Splitters
- Expands one PWM header to control 10 fans
- Molex 4-pin power feeds nine fans for stable operation
- Dedicated CPU fan port reports speed to motherboard
- 40 cm cable length fits most chassis layouts
- Self-adhesive backing simplifies installation and hides the PCB
Fan hub for multi-fan builds
This RIITOP PWM hub expands a single motherboard 4-pin header to ten fan connections. It is intended for enthusiasts who need to run many chassis or cooler fans from one PWM signal. The red CPU port reports speed to the board; the other nine ports receive the same PWM duty cycle but do not report speed back.
Powered by Molex from the PSU
The CPU fan draws power through the motherboard header while fans one to nine are fed by a Molex LP4 connector from the power supply. This arrangement removes the current limit of the board header and lets the hub drive up to ten fans without overloading the motherboard. A self-adhesive pad is included for securing the 70x47x17 mm board inside the case.
3-pin fans run at fixed full speed
Four-pin fans respond to temperature-controlled PWM curves; three-pin fans lack the control wire so they spin at full speed once connected. Only the dedicated CPU port provides a tachometer signal to the motherboard. The 40 cm cable keeps routing tidy and the unit weighs 25 g.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $9.99
- Cheaper than about 80% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | RIITOP |
| Model name | PWM1T10-D (RIITOP PWM Fan Hub 1 to 10 Fans Conotroller Splitter Adapter with Molex 4pin Power Supply Port for 3 pin 4 pin CPU Case Chasis Cooling Fan) |
| Product type | Cable Splitters |
| Product color | Black |
| Ports & slots | |
| First connector | 1x TX4 male |
| Second connector | 10x TX4 Male |
| Connector count | 10 |
| Connector details | PWM Fan Hub 1 to 10 Fans Conotroller Splitter |
| Size & build | |
| Overall length | 40 cm / 15.74 in. |
| Cable length | 1.31 ft (40 cm) |
Questions about this item
How many fans can run at once before the Molex connector limits total current?
The hub splits one motherboard PWM header into ten ports; the CPU fan draws power from the board while the other nine fans are fed through the Molex 4-pin connector from the PSU.
Does the hub stay quiet and cool when all ten fans run continuously?
The PCB measures 70 by 47 by 17 millimetres and weighs 25 grams; it has no active cooling, so noise and heat depend entirely on the attached fans and case airflow.
What motherboard header and power supply connector must I already have for this to work?
You need one free 4-pin PWM fan header on the motherboard and one spare Molex 4-pin (LP4) connector from the power supply.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister 25mm Large Diaphragm Cartridge Core Capsule internal power cable
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Ruth's sister USB-C Female to 4.0x1.7mm DC Adapter for Lenovo IdeaPad 310 110 100 internal power cable
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





