Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Splits one motherboard USB 2.0 9-pin header into four ports with a 30 cm cable and adhesive backing
This RIITOP adapter splits one motherboard 9-pin USB 2.0 header into four female 9-pin ports. The pack contains two identical boards, each with a 12in cable and a male connector that fits standard 9-pin or 10-pin headers. Builders who need extra internal USB connections for front-panel ports, card readers or lighting controllers can use these splitters.
Each board includes a double chipset designed to keep the four downstream ports stable during continuous data transfer. The 12in cable length and the approximate 1.96in by .98in PCB size allow the board to sit flat inside the chassis without tension on the header. The supplier notes that both boards can be separated into single units if the layout requires it.
Verify that your motherboard has a free 9-pin or 10-pin USB 2.0 header with the standard pinout before ordering. The adapter provides only USB 2.0 signalling, so devices that require USB 3.x bandwidth will not operate at their rated speed. Ensure the chassis has space for the 1.96in by .98in PCB and the 12in cable routing. Buyers who need USB 3.x internal headers or more than four ports per header cannot use this product.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | RIITOP |
| Product type | U21T4-2P (9pin USB Header Male 1 to 4 Female Extension Splitter Cable Connector Adapter Hub (2Pack), USB 2.0 Port Multiplier) |
| Product color | Black |
| Ports & slots | |
| Connection type | USB A to USB A |
| Connector count | 4 |
| Connector details | 9pin USB Header Male 1 to 4 Female Extension Splitter Cable Hub Connector |
| Connector gender | Male to Female |
| Size & build | |
| Cable length | 1 ft (0.3 m) |
| Overall length | 1 ft (0.3 m) |
| Compatibility | |
| Apple compatibility | 9pin USB 2.0 Slot |
The board uses a double chipset design that runs passively; no fan or heatsink is needed and the USB 2.0 bus supplies all power, so heat and draw stay minimal even with four devices connected.
You need a single free 9-pin (10-pin) USB 2.0 internal header on the motherboard; the male connector plugs directly into that header and splits it into four female 9-pin ports.
Yes — the adapter is USB 2.0 but backwards compatible, so any legacy USB 1.1 device plugged into one of the four female 9-pin ports will operate at its native speed.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?