Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16 GB DDR4-2933 ECC Registered RDIMM for server and workstation upgrades
This 16GB DDR4 module operates at 2933MHz with a CAS latency of CL21. It uses a 2Rx8 registered design with ECC for error correction. The module requires a 288-pin DDR4 server or workstation platform running at 1.2V.
The registered buffer reduces electrical load on the memory controller during continuous operation. ECC corrects single-bit errors in real time to prevent data corruption. Top-tier DRAM chips from Samsung, SK Hynix or Micron are tested for reliability under demanding enterprise workloads.
Insert the module into a compatible DDR4 RDIMM slot until the retention clips engage. The product only works in systems that support DDR4 registered ECC memory. Buyers who need unbuffered UDIMMs or a different DDR generation cannot use this module.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | RIMLANCE |
| Model name | RRD23400D8C16 |
| Total capacity | 16 GB |
| Product type | 288-Pin DDR4 SDRAM |
| Performance | |
| Rated speed | DDR4 2933 (PC4 23400) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL21 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx8 |
The module operates at 1.2 V, the standard DDR4 voltage, so power draw per stick stays low even under sustained load; total consumption scales with the number of populated DIMM slots.
A DDR4 server or workstation motherboard with registered DIMM support, an available 288-pin slot, and a memory controller that accepts ECC registered modules at 2933 MT/s.
Mixed speeds and latencies are usually supported; the memory controller will run all populated slots at the lowest common speed and timing, so the 2933 MT/s CL21 module will down-clock to match slower sticks.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?