Battery Technology Inc. ET-LAD60W-BTI projector lamp 330 Watt 2000 Hrs
- 330 W
- 2,000 Hrs.
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A replacement lamp module with a 200 W UHP bulb, rated 2 000 hours normal or 3 000 hours economy, ready to install in compatible Runco projectors
The Runco RS-1100 ALT is a 200W UHP replacement lamp module supplied as a fully assembled bulb and housing. It is designed for owners of compatible Runco projectors who need a direct, ready-to-install light source. The module arrives pre-aligned in its cage, so no separate bulb handling or alignment is required during installation.
This module restores original brightness when the existing lamp reaches the end of its rated 2,000-hour normal or 3,000-hour economy life. The jump is worth it when image brightness has dropped noticeably, colour balance has shifted, or the projector signals that the lamp hour counter has exceeded the specified limits. A fresh 200W UHP bulb returns the projector to its calibrated output without requiring optical realignment.
Before ordering, verify that your Runco projector lists the RS-1100 ALT or manufacturer part number RUPA 007500 as a compatible lamp. Confirm the current lamp hour reading in the projector menu to ensure the replacement timing matches the 2,000 or 3,000-hour ratings. Ensure the projector is powered off and cooled before swapping the module.
Measured against everything we stock in Replacement Projector Bulbs, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Runco |
| Product type | UHP |
| Display | |
| Lamp lifespan | 2,000 (Normal) - 3,000 (Economy) Hrs. |
| Power | |
| Power rating | 200 W |
The RS-1100 ALT module is built to the RUPA 007500 specification for direct fit in compatible Runco projectors; check your projector manual to confirm the exact model match before ordering.
Power off and unplug the projector, allow cooling, remove the old lamp cage, insert the new RS-1100 ALT housing until it seats firmly, secure the retaining screws, then reset the lamp-hour counter in the menu — the counter reset is the step most often forgotten.
Plan replacement at 2,000 hours in normal mode or 3,000 hours in economy mode; the projector will show a replacement warning and brightness will drop noticeably as the 200 W UHP bulb ages.
More in Replacement Projector Bulbs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?