Ruth's sister 009x internal power cable 60 cm
A PCIe 1x to 16x riser cable with USB 3.0 and SATA power, 60 cm long, for stable GPU extension
- Extends GPU reach with 60 cm flexible riser cable
- Stable power delivery via four FP solid-state capacitors
- 16 A capacity through 6-pin connector prevents wire burning
- USB 3.0 signal integrity for reliable data transfer
- Broad OS support including Linux, Windows 7, 8, 10
PCI-E 1x extender for mining rigs
This 60 cm riser card converts a single PCI-E 1x slot into a 16x physical connector, letting miners mount GPUs away from the motherboard. The assembly includes a USB 3.0 cable, a small adapter board and a SATA-to-6-pin power lead rated at 16 A. It targets builders who need flexible GPU placement in multi-card mining frames.
16 A auxiliary power with four solid-state
The onboard 6-pin connector draws supplemental current through a SATA lead, delivering up to 16 A to the graphics card. Four FP solid-state capacitors smooth the feed, reducing voltage droop and the risk of melted wires when a card pulls heavy current. Headroom ends at the 16 A rating; cards that exceed that draw need a stronger external supply.
PCI-E 1x electrical limit and USB 3.0 signal cable
Although the slot presents a 16x mechanical interface, the electrical link remains PCI-E 1x, so bandwidth tops out at gen-1 single-lane speeds. The USB 3.0 cable carries those signals over 60 cm without active repeaters; longer runs or higher signalling rates are not supported. The product suits mining workloads that tolerate the reduced throughput.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $13.99
- Cheaper than about 55% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Will the 60 cm riser fit alongside my existing PCIe x16 graphics card in the same chassis?
The 60 cm length gives enough reach to route the extender from a x1 slot to a GPU mounted elsewhere in the case, leaving the primary x16 slot free for another card.
How can I verify the four FP solid-state capacitors are delivering stable power to the GPU after installation?
The system should post without power-related artefacts; the GPU will report its normal clock speeds and draw up to 16 A through the 6-pin connector under load.
Does the package include the USB 3.0 cable and the small adapter card, or must I source them separately?
The box contains the USB 3.0 cable, the motherboard PCB and the small adapter card — no extra parts are required for a basic mining or extender setup.
More in Internal PSU & Riser Cables
Similar items
STARTECH LP4PCIEX8ADP 6.1 in LP4 to 8 Pin PCIe Power Cable Adapter
- 6.1 in (15.5 cm)
- Cable Connectors
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Ruth's sister IDC50P 50 Pin Male Connector to Terminal Block Adapter
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





