Ruth's sister 1 to 4 PWM Fan Splitter Cable 30cm
Splits one motherboard 4-pin header into four PWM fan connections for synchronised speed control over a 30 cm sleeved cable
- Connect four PWM fans to one motherboard header for synchronised speed control
- 30 cm sleeved cable keeps routing tidy and improves airflow
- 24 AWG wires deliver reliable power to each connected fan
- CE certified for electrical safety compliance
- Lightweight 20 g design adds minimal load to the header
Ruth's sister 1-to-4 PWM Fan Splitter
This 30 cm cable splits a single motherboard 4-pin header into four PWM fan connectors. It allows four case or CPU fans to run from one header while keeping automatic speed control tied to CPU temperature. The sleeved wiring reduces clutter inside the chassis. Builders needing more than four fans from one header will need an additional splitter or controller.
Capacity and headroom: four fans per header
Each of the four branches accepts a standard 4-pin PWM fan or a 3-pin fan. The cable carries the PWM signal to all connected fans so they ramp together with the CPU temperature curve. Total current is limited by the motherboard header rating, so very high-draw fans may exceed safe limits. Users with many high-power fans should check the header specification before loading all four ports.
What the sleeved extension changes
The 24 AWG wires are wrapped in a braided sleeve and heat-shrunk at each connector for durability and a cleaner look. At roughly 11.8 inches the cable reaches from a CPU header to nearby case fans without excess length. No software or extra adapters are included; the splitter works passively once plugged in.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $10.99
- Cheaper than about 70% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Will the 24 AWG wires on this splitter handle four fans from a single motherboard header without voltage drop?
The cable uses 24 AWG conductors and is 30 cm long, a gauge and length chosen to deliver sufficient current for four PWM fans on one header.
How can I verify the PWM speed control is functioning after I connect the fans?
Enter the BIOS or fan-control software and confirm that all four fans report RPM and respond to the CPU temperature curve.
Does the package include mounting clips or only the 30 cm sleeved splitter cable?
The box contains one 1-to-4 4-pin fan extension cable; no mounting clips or extra hardware are supplied.
More in Internal PSU & Riser Cables
Similar items
Nippon Labs POW-04412 12" Molex 5.25 Female to Female internal power cable
- 1 ft (0.3 m)
- Multi-Color
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





