Ruth's sister 12 V CCTV microphone pickup internal power cable
12 V DC CCTV microphone with audio and power cables covers 5 to 40 m² at -43 dB sensitivity
- High-sensitivity audio capture with -43 dB sensitivity at 1000 Hz
- Covers 5 to 40 square metres listening range for room-scale monitoring
- Simple plug-and-play installation with red power and white audio connectors
- Operates on 12 VDC at 10 mA for low-power CCTV integration
- High signal-to-noise ratio ensures clear sound for security recording
12 V CCTV microphone pickup
This DC 12 V microphone pickup captures audio for IP camera and DVR surveillance systems. It operates at 12 VDC with a 10 mA draw and includes red power and white audio connectors. The unit provides a listening range from 5 to 40 square meters.
Installers needing simple audio capture
Suited for security monitoring where a high-sensitivity microphone with plug-and-play setup is required. Not for users who need a longer cable run than supplied or who require a different operating voltage. Buyers wanting built-in recording storage should look elsewhere.
Plug-and-play installation
The microphone connects directly to the camera or DVR using the two colour-coded leads. No additional drivers or configuration are needed. The main issue is ensuring the 12 V supply is stable; incorrect polarity or voltage can damage the unit. Sensitivity is rated at -43 dB at 1000 Hz.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $7.99
- Cheaper than about 91% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Does the microphone need a separate 12 V DC power supply to operate?
Yes, it requires a 12 V DC source capable of supplying at least 10 mA; the red connector carries power and the white connector carries the audio signal.
Can I connect this pickup directly to the RCA audio input on an older analogue DVR?
The white RCA plug carries line-level audio from the microphone, so it can feed any recorder or camera with a compatible RCA audio input.
How do I verify the unit is capturing sound after wiring it up?
Monitor the recorder’s audio channel; you should hear clear pickup from anywhere within the 5 to 40 square metre listening area, with a sensitivity of –43 dB at 1000 Hz.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister USB to 25 Pin DB25 Parallel Printer Cable Adapter
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





