Ruth's sister 12pcs PCIe 6Pin to 8Pin 18AWG Breakout Board 750W 1200W
A 12-piece set of 18 AWG PCIe 6-pin to 8-pin cables with a breakout board supporting up to 1200 W and dual PSU start
- 12 PCIe 6-pin to 8-pin cables for multi-GPU setups
- 18 AWG conductors handle up to 1200 W per board
- Built-in voltmeter LED display shows real-time voltage
- Supports dual PSU start-up via 4-pin connector
- Compatible with 11 listed server PSU models
Breakout board for GPU mining rigs
This PCIe breakout board converts a single server power supply into twelve 6-pin to 8-pin connectors for graphics cards. It is built for miners and builders who run multiple GPUs from one high-wattage PSU. A voltmeter LED display shows the 12 V rail voltage at a glance. Dual PSU start-up is supported through a small 4-pin connector.
Handles twelve cards up to 1200 W
The board is rated for 750 W and 1200 W operation with up to twelve PCIe cables attached. It runs out of headroom when total GPU draw exceeds the 1200 W limit or when more than twelve cards are required. Compatible server PSUs include models such as DPS-1200FB A, DPS-1200QB A, HSTNS-PL12, HSTNS-PL18 and PS-2751-5Q up to 1600 W capacity.
18 AWG cables with on-board button
Twelve 18 AWG power cables ship with the board for immediate installation. The integrated power button lets you cycle the rig without reaching the PSU switch. Mounting uses the existing PSU screw holes, so no extra brackets are needed. Buyers who need more than twelve GPU connections or non-server ATX power supplies cannot use this board.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $39.99
- Pricier than about 78% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Will the 12 PCIe connectors on the breakout board work with the DPS-1200FB A server power supply I already own?
Yes, the DPS-1200FB A is listed among the supported Common Slot models, so the board's 12 connectors will mate correctly.
How can I confirm the voltmeter LED display is showing the correct 12 V rail voltage after installation?
The on-board LED voltmeter displays the +12 V rail in real time; a steady reading near 12 V indicates the board is operating as intended.
Does the package include the 12 PCIe 6-pin to 8-pin cables, or must they be purchased separately?
The package contains the breakout board plus 12 pieces of 6-pin to 8-pin 18AWG power cables; no extra cables are required.
More in Internal PSU & Riser Cables
Similar items
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





