Ruth's sister 200W FLEX ITX-1U Internal Power Cable
A 200W Flex ATX 1U internal power supply with passive PFC, 72% efficiency, 4-pin CPU and two SATA connectors for low-power desktops and servers
- 200 W rated power for low-energy systems
- 72 % efficiency reduces waste heat
- Passive PFC simplifies input circuitry
- 16 ms hold-up time bridges brief outages
- 2 SATA connectors power drives directly
Compact FLEX ITX-1U power supply
This 200 W unit fits the FlexATX 1.01 form factor and is aimed at Mini-ITX builds, POS terminals, industrial PCs and low-power NAS boxes. It delivers a 20+4 pin main connector, a 4-pin CPU plug and two SATA power leads, covering the basics for compact systems that do not need a discrete graphics card.
Sustained output and protection
The supply is rated for 200 W continuous power with a peak hold-up time of 16 ms and a power-good signal window of 100 to 500 ms. Passive PFC and 72 % typical efficiency mean it runs within its thermal envelope during long sessions, while built-in over-voltage, under-voltage, short-circuit and overload circuits shut the unit down safely if limits are exceeded.
Thermal and acoustic profile
A built-in 4 cm fan provides active cooling inside the 1U chassis; airflow scales with load so the unit stays within spec during normal desktop or server duty. Input range spans 184 to 264 V at 10 A maximum draw, and the non-modular cable set keeps internal routing simple for tight enclosures.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $36.99
- Pricier than about 76% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How much heat and power draw should I expect from the 200W FLEX ITX-1U supply running continuously?
The unit delivers 200W rated output at 72% efficiency with a 4cm cooling fan and built-in overload protection for sustained operation.
Which connectors must my motherboard and drives already provide to use this non-modular FLEX PSU?
It comes with a fixed 20+4Pin ATX connector, a 4-pin CPU power lead and two SATA power plugs for drives.
Will this 200W FLEX unit work with an older board that only has a 20-pin ATX socket and a 4-pin CPU header?
Yes, the 20+4Pin connector splits to fit 20-pin boards and the 4-pin CPU plug matches legacy headers.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister Internal Power Cable for Osmo Pocket Audio Adapter
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





