Ruth's sister 20cm 8-pin female to dual 8-pin (6+2) male PCIe power cable
A 20 cm PCIe cable splits one 8-pin female connector into two 8-pin (6+2) male plugs using 18 AWG tinned-copper wire
- Extends one 8-pin GPU connector into two 8-pin (6+2) male plugs
- 20 cm length keeps cable routing tidy inside compact cases
- 18 AWG 1007 wire with tinned copper conductors handles high current reliably
- PVC sheath protects against abrasion and heat inside the chassis
- 8-pin female to dual 8-pin (6+2) male interface fits standard PCIe power sockets
Single-to-dual GPU power splitter
This 20 cm cable converts one 8-pin female PCIe connector into two 8-pin (6+2) male plugs, letting a single PSU output feed two graphics-card power inputs. It suits builders adding a second GPU or routing power in tight layouts where the stock harness falls short.
Thermals and power delivery
The 18 AWG 1007 tinned-copper conductors handle typical GPU current loads while the PVC sheath resists heat inside the case. No active cooling or electronics are present, so the cable adds no noise and draws no power beyond what the connected cards require.
What the bundle changes
Only the splitter cable itself is included; no adapters, combs, software or mounting hardware ship with it. The 20 cm length reduces slack compared with full-length PSU cables, helping cable management in compact builds without introducing extra connection points.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $7.99
- Cheaper than about 91% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How do I connect the 8-pin female end to my power supply and the two 8-pin (6+2) male ends to the graphics card?
Plug the single 8-pin female connector into the PSU's PCIe 8-pin output, then attach each 8-pin (6+2) male connector to the GPU's 8-pin sockets; the 20cm 18AWG 1007 tinned-copper wires handle the current.
Will the PVC sheath or tinned-copper conductors degrade and need replacement?
The PVC sheath and tinned-copper cores are rated for continuous internal use; no scheduled replacement is required unless physical damage or connector wear appears.
At what power draw does the 18AWG 1007 wire become the limiting factor under sustained load?
The 18AWG 1007 tinned-copper conductors are the first limit; sustained loads near the wire's ampacity will cause voltage drop and heating before the connectors reach their rating.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister USB to 25 Pin DB25 Parallel Printer Cable Adapter
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





