Ruth's sister 24V 65W Heating Cartridge 15CM Green internal power cable
24 V 65 W cartridge heater reaches 240 °C in one minute from 25 °C ambient with a 15 cm green lead and MX3.0 terminal
- Heats to 240 °C in one minute at 25 °C ambient
- 24 V 65 W output delivers strong hot-end performance
- Compact 15 mm rod fits tight Volcano-style blocks
- 15 cm green cable with MX3.0 terminal eases wiring
- Durable metal shell resists oxidation and discoloration
Heating cartridge for 3D printer hotends
This 24 V 65 W cartridge heater fits Volcanos-style hotend blocks and reaches 240 °C from a 25 °C start in about one minute. The 15 mm rod length suits dragon, mosquito, lizard and similar hotend designs without interfering with mounting positions. It is intended for makers and repair technicians who need a direct replacement heater for high-temperature printing.
Green 15 cm lead with MX3.0 terminal
The flexible green cable measures 15 cm and terminates in an MX3.0 connector that requires an adapter board or a custom extension for most control boards. High-quality metal sheathing on the rod resists oxidation and discolouration, while the supple wire insulation reduces fatigue during repeated hotend movements. No additional mounting hardware is included in the package.
Thermal performance and power draw
At 24 V the cartridge draws 65 W and can heat the block to 240 °C in roughly sixty seconds under the stated test conditions. The short 15 cm lead keeps voltage drop minimal, and the metal shell transfers heat efficiently to the heater block without audible noise. Buyers who need longer cable runs or a different connector style will have to source or build an adapter separately.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $10.99
- Cheaper than about 70% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What voltage and wattage does this heating cartridge use?
The cartridge runs at 24 V and delivers 65 W of heating power.
What are the physical dimensions of the heating rod and its cable?
The rod is 15 mm long and the green internal power cable measures 15 cm or 5.9 in.
How do I connect the MX3.0 terminal to my printer board?
Plug the MX3.0 terminal into a matching adapter board or extend the wires directly; ensure the connector seats fully before powering on.
More in Internal PSU & Riser Cables
Similar items
Nippon Labs POW-04412 12" Molex 5.25 Female to Female internal power cable
- 1 ft (0.3 m)
- Multi-Color
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Ruth's sister JEYI Heat Sink 7mm Ultra-thin Solid State Hard Disk Heatsink internal power cable
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





